EU32015L1127Enacted

COMMISSION DIRECTIVE (EU) 2015/1127 of 10 July 2015 amending Annex II to Directive 2008/98/EC of the European Parliament and of the Council on waste and repealing certain Directives THE EUROPEAN COMMISSION,

Jurisdiction:
European Union
Type:
Labeling · Other
Last action:
Jan 1, 2015
OrganicsBiobasedOther
Next steps for producers

Confirm your obligations with European Commission — Environment (Circular Economy) and track its implementing rules

Next deadline: Dec 31, 2029
Obligations under this law
  • ·Operators of municipal solid waste incineration facilities must apply the Climate Correction Factor (CCF) to the R1 energy efficiency formula to determine whether their facility qualifies as a recovery operation (R1) rather than a disposal operation
  • ·Facilities in operation and permitted before 1 September 2015 must use CCF regime 1 until 31 December 2029, after which they must switch to CCF regime 2
  • ·Facilities permitted after 31 August 2015 must apply CCF regime 2 from the outset
European Commission — Environment (Circular Economy) →

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

Amends Annex II of the Waste Framework Directive (2008/98/EC) to clarify waste classification and end-of-waste criteria, advancing circular economy by establishing clearer definitions for compostable materials and organic waste streams, supporting composting infrastructure and biological-cycle material recovery.
Covered Products
  • ·Municipal solid waste processed in incineration facilities dedicated to the processing of municipal solid waste
Producer Obligations
  • ·Operators of municipal solid waste incineration facilities must apply the Climate Correction Factor (CCF) to the R1 energy efficiency formula to determine whether their facility qualifies as a recovery operation (R1) rather than a disposal operation
  • ·Facilities in operation and permitted before 1 September 2015 must use CCF regime 1 until 31 December 2029, after which they must switch to CCF regime 2
  • ·Facilities permitted after 31 August 2015 must apply CCF regime 2 from the outset
  • ·HDD value must be calculated as the average of annual HDD values over 20 consecutive years before the year for which CCF is calculated, using the Eurostat methodology
  • ·CCF result must be rounded to three decimal places
Key Deadlines
Sep 1, 2015compliance: Cut-off date distinguishing installations subject to CCF regime 1 (permitted before this date) from those subject to CCF regime 2 (permitted after 31 August 2015)
Dec 31, 2029compliance: Deadline after which installations originally subject to CCF regime 1 must transition to the stricter CCF regime 2
Jul 31, 2016compliance: Deadline for Member States to transpose this Directive into national law and communicate the text of those provisions to the Commission
Jul 31, 2015other: Directive enters into force on the twentieth day following publication in the Official Journal (published 11 July 2015)
Preemption Notes
This is an EU Commission Directive amending Annex II of Directive 2008/98/EC. Member States must transpose it but may adopt stricter national measures in line with EU waste law. The Directive harmonises the R1 formula correction factor across the EU, limiting divergence in how recovery status is determined for municipal solid waste incineration.

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

Full bill text

11.7.2015

EN

Official Journal of the European Union

L 184/13

COMMISSION DIRECTIVE (EU) 2015/1127
of 10 July 2015

amending Annex II to Directive 2008/98/EC of the European Parliament and of the Council on waste and repealing certain Directives
(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives ( 1 ) and in particular Article 38(1) thereof,

Whereas:

(1)

Annex II to Directive 2008/98/EC sets out a non-exhaustive list of recovery operations.

(2)

The R1 operation in Annex II to Directive 2008/98/EC applies to waste replacing fuel or other means to generate energy. This includes incineration facilities dedicated to the processing of municipal solid waste only where their energy efficiency meet the threshold established by using the energy efficiency formula (R1 formula) referred to in Annex II to Directive 2008/98/EC.

(3)

It results from technical evidence that local climate conditions in the Union influence the amounts of energy that can technically be used or produced in the form of electricity, heating, cooling or processing steam by incineration facilities dedicated to the processing of municipal solid waste.

(4)

A report from the Joint Research Centre of the European Commission has shown that in order to achieve a level playing field in the Union it is reasonable to compensate incineration facilities affected by the impact of local climatic conditions with a climate correction factor (CCF) applicable to the R1 formula. Such factor should be based on the reference document on Best Available Techniques for waste incineration.

(5)

As a result of the application of a CCF some disposal incineration installations would meet the R1 formula threshold and thus automatically become recovery incineration facilities. Notwithstanding that, the application of such a correction factor should remain an incentive for incineration plants to achieve high efficiency of energy production from waste in line with the objectives and the waste hierarchy laid down in Directive 2008/98/EC.

(6)

The CCF applicable to the R1 formula should be based on climatic conditions for the incineration facility location.

(7)

Directive 2008/98/EC should therefore be amended accordingly.

(8)

The measures provided for in this Directive are in accordance with the opinion of the Committee established by Article 39 of Directive 2008/98/EC,

HAS ADOPTED THIS DIRECTIVE:

Article 1
Annex II to Directive 2008/98/EC is amended as set out in the Annex.

Article 2

1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 31 July 2016, at the latest. They shall forthwith communicate to the Commission the text of those provisions.
When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Article 4
This Directive is addressed to the Member States.

Done at Brussels, 10 July 2015.

For the Commission

The President

Jean-Claude JUNCKER

( 1 )
OJ L 312, 22.11.2008, p. 3 .

ANNEX
In Annex II to Directive 2008/98/EC, the following text is added under footnote (*):

‘The energy efficiency formula value will be multiplied by a climate correction factor (CCF) as shown below:

1.

CCF for installations in operation and permitted in accordance with applicable Union legislation before 1 September 2015.
CCF = 1 if HDD >= 3 350

CCF = 1,25 if HDD <= 2 150

CCF = – (0,25/1 200) × HDD + 1,698 when 2 150 < HDD < 3 350

2.

CCF for installations permitted after 31 August 2015 and for installations under 1 after 31 December 2029:
CCF = 1 if HDD >= 3 350

CCF = 1,12 if HDD <= 2 150

CCF = – (0,12/1 200) × HDD + 1,335 when 2 150 < HDD < 3 350

(The resulting value of CCF will be rounded at three decimal places).
The value of HDD (Heating Degree Days) should be taken as the average of annual HDD values for the incineration facility location, calculated for a period of 20 consecutive years before the year for which CCF is calculated. For the calculation of the value of HDD the following method established by Eurostat should be applied: HDD is equal to (18 °C — Tm) × d if Tm is lower than or equal to 15 °C (heating threshold) and is nil if Tm is greater than 15 °C; where Tm is the mean (Tmin + Tmax/2) outdoor temperature over a period of d days. Calculations are to be executed on a daily basis (d = 1), added up to a year.’

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.