JP407M50000100061Enacted

容器包装廃棄物の分別収集に関する省令

Jurisdiction:
Japan
Type:
EPR · Labeling
Last action:
Dec 14, 1995
Plastic PackagingPaper PackagingGlassMetals
Next steps for producers

Confirm your obligations with Japan Containers and Packaging Recycling Association (JCPRA) and track its implementing rules

Obligations under this law
  • ·Containers and packaging must meet material-specific separation standards (分別基準) when collected by municipalities under municipal separate collection plans
  • ·Steel packaging: must be collected in quantities equivalent to maximum load of a 10,000 kg vehicle, compressed, free of other-material packaging, free of non-packaging attachments, washed (except high-pressure gas containers); high-pressure gas containers must have contents, lids, and easily removable spray buttons removed
  • ·Aluminum packaging: same standards as steel packaging
Japan Containers and Packaging Recycling Association (JCPRA) →

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

Ministerial ordinance establishing mandatory separate collection and quality standards for container/packaging waste under Japan's Container and Packaging Recycling Law (1995), a foundational EPR framework; sets detailed sorting criteria by material type to facilitate producer responsibility for recycling.
Covered Products
  • ·Steel containers and packaging (主として鋼製の容器包装)
  • ·Aluminum containers and packaging (主としてアルミニウム製の容器包装)
  • ·Glass containers excluding borosilicate and milk-white glass (主としてガラス製の容器)
  • ·Corrugated cardboard containers and packaging (主として段ボール製の容器包装)
  • ·Paper containers for beverages excluding aluminum-laminated and corrugated types (主として紙製の飲料用容器)
  • ·Paper containers and packaging excluding corrugated and beverage containers (主として紙製の容器包装)
  • ·PET containers for beverages, soy sauce, and other products designated by the Minister of the Environment (ポリエチレンテレフタレート製の容器)
  • ·Plastic containers and packaging excluding PET beverage/soy sauce containers (主としてプラスチック製の容器包装)
  • ·Packaging used for wrapping/bundling goods (こん包)
Producer Obligations
  • ·Containers and packaging must meet material-specific separation standards (分別基準) when collected by municipalities under municipal separate collection plans
  • ·Steel packaging: must be collected in quantities equivalent to maximum load of a 10,000 kg vehicle, compressed, free of other-material packaging, free of non-packaging attachments, washed (except high-pressure gas containers); high-pressure gas containers must have contents, lids, and easily removable spray buttons removed
  • ·Aluminum packaging: same standards as steel packaging
  • ·Glass containers: must meet quantity, purity, and non-contamination standards; washed; sorted by color (clear, brown, other); non-glass lids removed; no crystallized glass mixed in
  • ·Corrugated cardboard packaging: must meet quantity, compression, purity, and non-contamination standards; must not be wet
  • ·Paper beverage containers (non-aluminum, non-corrugated): must meet quantity, purity, and non-contamination standards; washed and dried; cut open or compressed
  • ·Other paper packaging: must meet quantity, purity, non-contamination, and dryness standards; bundled or compressed; no corrugated or beverage paper containers mixed in; non-paper lids removed
  • ·PET containers: must meet quantity, compression, purity, washing, and non-contamination standards; non-PET plastic packaging must not be mixed in; non-PET lids removed
  • ·Other plastic packaging: must meet quantity, purity, and non-contamination standards; compressed (except white expanded polystyrene food trays); no PET beverage/soy sauce containers mixed in; non-plastic lids removed; white expanded polystyrene food trays must be washed and dried
Key Deadlines
Dec 15, 1995compliance: Initial enforcement date of the ministerial ordinance (law enforcement date)
Jun 15, 1996compliance: Second amendment enforcement date
Apr 1, 2000compliance: Fourth amendment enforcement date
Jan 6, 2001compliance: Fifth amendment enforcement date (following Cabinet Law partial amendment)
Apr 1, 2007compliance: Sixth amendment main provisions enforcement date
Apr 1, 2008compliance: Sixth amendment Article 2 table revision enforcement date (separation standards table)
Apr 1, 2008other: Start of first 3-year municipal separate collection plan period (市町村分別収集計画); plans must be set with April of every third year starting 2008 as the beginning
Apr 1, 2008other: Start of first 3-year prefectural separate collection promotion plan period (都道府県分別収集促進計画); plans must be set with April of every third year starting 2008 as the beginning
Enforcement
Ministry of the Environment (環境省); municipalities (市町村) for separate collection plan implementation; prefectures (都道府県) for promotion plans:

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

Full bill text

容器包装廃棄物の分別収集に関する省令
容器包装に係る分別収集及び再商品化の促進等に関する法律(平成七年法律第百十二号)第二条第五項及び第六項の規定に基づき、容器包装廃棄物の分別収集に関する省令を次のように定める。

(環境省令で定める行為)
第一条

容器包装に係る分別収集及び再商品化の促進等に関する法律(平成七年法律第百十二号。以下「法」という。)第二条第五項の環境省令で定める行為は、こん包とする。

(分別基準)
第二条

法第二条第六項の環境省令で定める基準は、次の表の中欄に掲げる市町村が法第八条に規定する市町村分別収集計画に基づき容器包装廃棄物について分別収集をして得られた物ごとに当該物に対応する同表の下欄に掲げるとおりとする。

一

主として鋼製の容器包装に係る物

一 原則として最大積載量が一万キログラムの自動車に積載することができる最大の容量に相当する程度の分量の物が収集されていること。
二 圧縮されていること。
三 原材料として主として他の素材を利用した容器包装が混入していないこと。
四 容器包装以外の物が付着し、又は混入していないこと。
五 洗浄されていること。ただし、高圧ガスを充てんする容器にあっては、この限りでない。
六 高圧ガスを充てんする容器にあっては、充てん物、ふた及び噴射のための押しボタン(除去することが容易なものに限る。)が除去されていること。

二

主としてアルミニウム製の容器包装に係る物

一の項各号に適合すること。

三

主としてガラス製の容器(主としてほうけい酸ガラス製のもの及び主として乳白ガラス製のものを除く。)に係る物

一 一の項第一号、第三号及び第四号に適合すること。
二 洗浄されていること。
三 無色のガラス製の容器、茶色のガラス製の容器及びその他のガラス製の容器に区別されていること。
四 主としてガラス製のふた以外のふたが除去されていること。
五 主として結晶化ガラス製の物が混入していないこと。

四

主として段ボール製の容器包装に係る物

一 一の項第一号から第四号までに適合すること。
二 濡れていないこと。

五

主として紙製の容器包装であって、飲料を充てんするための容器(原材料としてアルミニウムが利用されているもの及び主として段ボール製のものを除く。)に係る物

一 一の項第一号、第三号及び第四号に適合すること。
二 洗浄され、乾燥されていること。
三 切り開かれ、又は圧縮されていること。

六

主として紙製の容器包装(主として段ボール製の容器包装及び飲料を充てんするための容器(原材料としてアルミニウムが利用されているもの及び主として段ボール製のものを除く。)を除く。)に係る物

一 一の項第一号、第三号及び第四号並びに四の項第二号に適合すること。
二 結束され、又は圧縮されていること。
三 主として段ボール製の容器包装及び主として紙製の容器包装であって、飲料を充てんするための容器(原材料としてアルミニウムが利用されているもの及び主として段ボール製のものを除く。)が混入していないこと。
四 紙製のふた以外のふたが除去されていること。

七

主としてプラスチック製の容器包装であって、飲料、しょうゆその他環境大臣が定める商品を充てんするためのポリエチレンテレフタレート製の容器に係る物

一 一の項第一号から第四号まで及び三の項第二号に適合すること。
二 ポリエチレンテレフタレート製以外の主としてプラスチック製の容器包装が混入していないこと。
三 ポリエチレンテレフタレート製のふた以外のふたが除去されていること。

八

主としてプラスチック製の容器包装(飲料、しょうゆその他環境大臣が定める商品を充てんするためのポリエチレンテレフタレート製の容器を除く。)に係る物

一 一の項第一号、第三号及び第四号に適合すること。
二 圧縮されていること。ただし、白色の発泡スチロール製食品用トレイのみの場合にあっては、この限りでない。
三 飲料、しょうゆその他環境大臣が定める商品を充てんするためのポリエチレンテレフタレート製の容器が混入していないこと。
四 プラスチック製のふた以外のふたが除去されていること。
五 白色の発泡スチロール製食品用トレイのみの場合にあっては、洗浄され、乾燥されていること。

(市町村分別収集計画)
第三条

法第八条第一項の規定により市町村が定める市町村分別収集計画は、平成二十年を初年とする同年以後の三年ごとの各年の四月を始期として定めるものとする。

(都道府県分別収集促進計画)
第四条

法第九条第一項の規定により都道府県が定める都道府県分別収集促進計画は、平成二十年を初年とする同年以後の三年ごとの各年の四月を始期として定めるものとする。

附 則

この省令は、法の施行の日(平成七年十二月十五日)から施行する。

附 則

この省令は、平成八年六月十五日から施行する。

附 則

この省令は、公布の日から施行する。

附 則

この省令は、平成十二年四月一日から施行する。

附 則

(施行期日)
1

この省令は、内閣法の一部を改正する法律(平成十一年法律第八十八号)の施行の日(平成十三年一月六日)から施行する。

附 則

(施行期日)
第一条

この省令は、平成十九年四月一日から施行する。
ただし、第二条の表の改正規定は、平成二十年四月一日から施行する。

(経過措置)
第二条

この省令の施行前に容器包装に係る分別収集及び再商品化の促進等に関する法律第八条第一項又は第九条第一項の規定に基づき定められた市町村分別収集計画又は都道府県分別収集促進計画については、この省令による改正後の容器包装廃棄物の分別収集に関する省令第三条又は第四条の規定にかかわらず、なお従前の例による。

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.