JP413M60000400088Enacted

棚の製造の事業を行う者の再生資源の利用の促進に関する判断の基準となるべき事項を定める省令

Jurisdiction:
Japan
Type:
Labeling · EPR · Right to Repair
Last action:
Mar 28, 2001
MetalsFurniture
Next steps for producers

Confirm your obligations with METI/MOE — Japan recycling schemes and track its implementing rules

Applies toPersons engaged in the business of manufacturing shelves (limited to metal shelves)

Obligations under this law
  • ·Use raw materials in parts/components that are suitable for recycled resource utilization
  • ·Reduce the number of types of raw materials used in parts/components
  • ·Reduce the number of parts/components in which recyclable raw materials are difficult to separate from other raw materials
METI/MOE — Japan recycling schemes →

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

Ministerial ordinance under the Resource Efficiency Promotion Law establishing design and manufacturing standards for metal shelving to promote recycled-resource utilization through material selection, disassembly-friendly design, material labeling, and producer information provision—core product stewardship and circular-economy measures.
Covered Products
  • ·Metal shelving units (shelves made of metal), including components and parts such as support columns, shelf boards, and other parts/materials
Producer Obligations
  • ·Use raw materials in parts/components that are suitable for recycled resource utilization
  • ·Reduce the number of types of raw materials used in parts/components
  • ·Reduce the number of parts/components in which recyclable raw materials are difficult to separate from other raw materials
  • ·Facilitate disassembly of parts/components by reducing the number of screws, adopting joining methods that allow easy separation of recyclable parts from non-recyclable parts, and other measures
  • ·Facilitate collection and transportation of shelves
  • ·Mark the material name on synthetic resin parts/components weighing 100 grams or more to facilitate sorting for recycled resource utilization
  • ·Ensure safety during processing by considering the characteristics of raw materials and structure
  • ·Balance recycled resource utilization measures with safety, durability, and other necessary considerations
  • ·Pursue improvement of technologies necessary to promote recycled resource utilization
  • ·Conduct pre-design evaluation of shelves in accordance with Articles 1 through 4 to promote recycled resource utilization
  • ·Establish evaluation items, evaluation criteria, and evaluation methods for each type of shelf for the purpose of pre-design evaluation
  • ·Maintain necessary records when conducting pre-design evaluations
  • ·Provide information on shelf structure, methods for removing parts/components, material names of parts/components, and other information useful for promoting recycled resource utilization
  • ·Use raw materials that are easy to utilize as recycled resources, or raw materials that utilize recycled resources, in packaging materials for shelves, while considering safety, functionality, and economic factors
  • ·Adopt packaging structures that allow easy separation of recyclable packaging materials from other packaging materials, and structures that facilitate collection and transportation, while considering safety, functionality, and economic factors
Key Deadlines
Apr 1, 2001compliance: Ministerial ordinance enters into force; all obligations become applicable
Producer Definition
Persons engaged in the business of manufacturing shelves (limited to metal shelves)
Preemption Notes
This is a national ministerial ordinance issued under Article 21, Paragraph 1 of the Act on the Promotion of Effective Utilization of Resources; it sets national standards for metal shelf manufacturers in Japan.
Compliance Dimensions
Recycled-Content MinimumsMinimum recycled-content required

“棚の部品等(部品又は部材をいう。以下同じ。)への再生資源としての利用が可能な原材料の使用、部品等に使用する原材料の種類数の削減、再生資源としての利用が可能な原材料を他の原材料から分離することが困難な部品等の数の削減その他の措置を講ずるものとする。”

LabelingMaterial Id

“重量が百グラム以上の合成樹脂製の部品等の材質名の表示その他の分別のための工夫を行うことにより、棚に係る再生資源の利用のための分別を容易にするものとする。”

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

Full bill text

棚の製造の事業を行う者の再生資源の利用の促進に関する判断の基準となるべき事項を定める省令
資源の有効な利用の促進に関する法律(平成三年法律第四十八号)第二十一条第一項の規定に基づき、棚の製造の事業を行う者の再生資源の利用の促進に関する判断の基準となるべき事項を定める省令を次のように定める。

(原材料の工夫)
第一条

棚(金属製のものに限る。以下同じ。)の製造の事業を行う者(以下「事業者」という。)は、棚に係る再生資源の利用を促進するため、支柱、棚板その他の棚の部品等(部品又は部材をいう。以下同じ。)への再生資源としての利用が可能な原材料の使用、部品等に使用する原材料の種類数の削減、再生資源としての利用が可能な原材料を他の原材料から分離することが困難な部品等の数の削減その他の措置を講ずるものとする。

(構造の工夫)
第二条

事業者は、棚に係る再生資源の利用を促進するため、ねじの数量の削減、再生資源としての利用が可能な原材料の部品等を他の原材料の部品等から分離することが容易な接合方法の採用その他の部品等の取り外しの容易化、回収及び運搬の容易化その他の措置により、棚の処理を容易にするものとする。

(分別のための工夫)
第三条

事業者は、棚に係る再生資源の利用を促進するため、重量が百グラム以上の合成樹脂製の部品等の材質名の表示その他の分別のための工夫を行うことにより、棚に係る再生資源の利用のための分別を容易にするものとする。

(処理に係る安全性の確保)
第四条

事業者は、棚に係る再生資源の利用を促進するため、原材料及び構造の特性に配慮することにより、処理に係る安全性を確保するものとする。

(安全性等の配慮)
第五条

事業者は、前各条の規定に即して棚に係る再生資源の利用を促進する際には、棚の安全性及び耐久性その他の必要な事情に配慮するものとする。

(技術の向上)
第六条

事業者は、棚に係る再生資源の利用を促進するため、必要な技術の向上を図るものとする。

(事前評価)
第七条

事業者は、棚の設計に際して、棚に係る再生資源の利用を促進するため、第一条から第四条までの規定に即して、あらかじめ棚の評価を行うものとする。

2

事業者は、前項の評価を行うため、棚の種類ごとに評価項目、評価基準及び評価方法を定めるものとする。

3

事業者は、第一項の評価を行うに際し、必要な記録を行うものとする。

(情報の提供)
第八条

事業者は、棚の構造、部品等の取り外し方法、部品等の材質名その他の棚に係る再生資源の利用の促進に資する情報の提供を行うものとする。

(包装材の工夫)
第九条

事業者は、棚に係る包装材に関し、安全性、機能性、経済性その他の必要な事情に配慮しつつ、再生資源としての利用が容易な原材料又は再生資源を利用した原材料を使用するものとする。

2

事業者は、棚に係る包装材の再生資源としての利用を促進するため、棚に係る包装について、安全性、機能性、経済性その他の必要な事情に配慮しつつ、再生資源としての利用が可能な包装材を他の包装材から分離することが容易な構造の採用、回収及び運搬が容易な構造の採用その他の措置を講ずるものとする。

附 則

この省令は、平成十三年四月一日から施行する。

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.