JP414M60001800001Enacted

建設工事に係る資材の再資源化等に関する法律施行規則

Jurisdiction:
Japan
Type:
EPR · Labeling · Other
Last action:
Mar 5, 2002
Construction
Next steps for producers

Confirm your obligations with METI/MOE — Japan recycling schemes and track its implementing rules

Applies to対象建設工事の元請業者 (general contractors of covered construction works), including those undertaking demolition, new construction, and renovation projects subject to the Construction Material Recycling Act (平成十二年法律第百四号)

Obligations under this law
  • ·Conduct pre-work surveys of the target building/structure and surroundings, work areas, transport routes, residual items, asbestos spray and other attached substances, and other relevant conditions
  • ·Prepare a 分別解体等の計画 (selective demolition plan) based on survey results, including work type, survey results, pre-work measures, process sequence and methods, estimated quantities of specified construction material waste by type, and locations of generation
  • ·Secure work areas and transport routes, confirm removal of residual items, and implement pre-work measures including removal of attached substances (e.g., sprayed asbestos) before commencing work
METI/MOE — Japan recycling schemes →

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

Enforcement regulation for Japan's Construction Material Recycling Law (Law No. 104 of 2000), establishing mandatory separated demolition/deconstruction procedures, material tracking, and waste classification for construction & demolition materials—core product stewardship and circular economy infrastructure for the construction sector.
Covered Products
  • ·特定建設資材 (specified construction materials) used in 対象建設工事 (covered construction works)
  • ·特定建設資材廃棄物 (specified construction material waste) including wood, concrete, asphalt concrete, and other designated materials
  • ·指定建設資材廃棄物 (designated construction material waste) subject to recycling facility distance standards
Producer Obligations
  • ·Conduct pre-work surveys of the target building/structure and surroundings, work areas, transport routes, residual items, asbestos spray and other attached substances, and other relevant conditions
  • ·Prepare a 分別解体等の計画 (selective demolition plan) based on survey results, including work type, survey results, pre-work measures, process sequence and methods, estimated quantities of specified construction material waste by type, and locations of generation
  • ·Secure work areas and transport routes, confirm removal of residual items, and implement pre-work measures including removal of attached substances (e.g., sprayed asbestos) before commencing work
  • ·Execute construction work in accordance with the selective demolition plan
  • ·For building demolition, follow the prescribed process order: (1) removal of building equipment, interior materials and other parts (excluding roofing, exterior materials, and structural load-bearing parts); (2) removal of roofing materials; (3) demolition of exterior materials and structural load-bearing parts excluding foundations and foundation piles; (4) demolition of foundations and foundation piles
  • ·Where interior materials in process step (1) contain wood, pre-remove gypsum board and other construction materials integrated with wood that would impede separation before removing the wood
  • ·For structure (non-building) demolition, follow the prescribed process order: (1) removal of fences, lighting, signs and other appurtenances; (2) demolition of non-foundation parts; (3) demolition of foundations and foundation piles
  • ·Use hand labor, or hand labor combined with machinery, for selective demolition; hand labor is mandatory for building demolition process steps (1) and (2) unless technically infeasible due to structural or construction reasons
  • ·Ensure recycling facilities for 指定建設資材廃棄物 are within 50 kilometers of the construction site
  • ·Where road access to a recycling facility is unavailable and transport cost for volume reduction (縮減) is lower than for recycling, volume reduction may substitute for recycling
  • ·Upon completion of recycling etc., report to the project owner (発注者) the completion date, name and location of the recycling facility used, and costs incurred
  • ·Reports to the project owner may be made electronically via telecommunications network file transfer, online viewing with file recording, or delivery of magnetic disk or equivalent file medium, provided the owner can produce a printed document from the file
Exemptions
  • ·The prescribed demolition process order for buildings does not apply where structural or technical construction reasons make compliance infeasible
  • ·The requirement to pre-remove gypsum board etc. integrated with wood before removing wood does not apply where structural or technical construction reasons make compliance infeasible
  • ·Volume reduction (縮減) may substitute for recycling of 指定建設資材廃棄物 where: (a) no road accessible by transport vehicles exists between the construction site and a recycling facility, AND (b) transport cost for volume reduction is lower than transport cost for recycling
  • ·Article 2(4) (pre-removal of materials integrated with wood) does not apply to covered construction works already commenced as of 2010-04-01
Key Deadlines
May 30, 2002compliance: Initial enforcement date of the ministerial ordinance (法附則第一条第二号 施行日)
Apr 1, 2010compliance: Amendment effective date introducing Article 2(4) requirement to pre-remove gypsum board etc. integrated with wood; does not apply to construction works already commenced at that date
Sep 1, 2021compliance: Latest amendment effective date
Producer Definition
対象建設工事の元請業者 (general contractors of covered construction works), including those undertaking demolition, new construction, and renovation projects subject to the Construction Material Recycling Act (平成十二年法律第百四号)
Enforcement
都道府県知事 (prefectural governors); 主務大臣 (competent ministers) for ministerial ordinance provisions: Prefectural governors may collect reports under Article 8 regarding documents issued under Article 13(1) and (2) of the Act, measures taken under Article 13(3), and other matters related to recycling of specified construction material waste as deemed necessary
Preemption Notes
This is a national ministerial ordinance (省令) implementing a national law; prefectural governors have reporting/inspection authority but the substantive standards are set nationally, limiting sub-national variation.
Compliance Dimensions
Bans & RestrictionsDemolition of buildings without following prescribed sequential order (building equipment/interior → roofing → exterior/structural → foundations) (Design Ban), 2002; Use of machine-only methods for first and second stages of building demolition (hand labor required unless technically unavoidable) (Material Restriction), 2002; Removal of wood interior materials without first pre-removing integrated gypsum board and other materials that impede wood waste separation (Design Ban), 2010

“建築物に係る解体工事の工程は、次に掲げる順序に従わなければならない。 ただし、建築物の構造上その他解体工事の施工の技術上これにより難い場合は、この限りでない。 一 建築設備、内装材その他の建築物の部分(屋根ふき材、外装材及び構造耐力上主要な部分を除く。)の取り外し 二 屋根ふき材の取り外し 三 外装材並びに構造耐力上主要な部分のうち基礎及び基礎ぐいを除いたものの取り壊し 四 基礎及び基礎ぐいの取り壊し”

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

Full bill text

建設工事に係る資材の再資源化等に関する法律施行規則
建設工事に係る資材の再資源化等に関する法律(平成十二年法律第百四号)第九条第二項、第十六条並びに第十八条第一項及び第三項並びに建設工事に係る資材の再資源化等に関する法律施行令(平成十二年政令第四百九十五号)第五条第一項及び第六条第三項の規定に基づき、建設工事に係る資材の再資源化等に関する法律施行規則を次のように定める。

(用語)
第一条

この省令において使用する用語は、建設工事に係る資材の再資源化等に関する法律(以下「法」という。)において使用する用語の例による。

(分別解体等に係る施工方法に関する基準)
第二条

法第九条第二項の主務省令で定める基準は、次のとおりとする。

一

対象建設工事に係る建築物等(以下「対象建築物等」という。)及びその周辺の状況に関する調査、分別解体等をするために必要な作業を行う場所(以下「作業場所」という。)に関する調査、対象建設工事の現場からの当該対象建設工事により生じた特定建設資材廃棄物その他の物の搬出の経路(以下「搬出経路」という。)に関する調査、残存物品(解体する建築物の敷地内に存する物品で、当該建築物に用いられた建設資材に係る建設資材廃棄物以外のものをいう。以下同じ。)の有無の調査、吹付け石綿その他の対象建築物等に用いられた特定建設資材に付着したもの(以下「付着物」という。)の有無の調査その他対象建築物等に関する調査を行うこと。

二

前号の調査に基づき、分別解体等の計画を作成すること。

三

前号の分別解体等の計画に従い、作業場所及び搬出経路の確保並びに残存物品の搬出の確認を行うとともに、付着物の除去その他の工事着手前における特定建設資材に係る分別解体等の適正な実施を確保するための措置を講ずること。

四

第二号の分別解体等の計画に従い、工事を施工すること。

2

前項第二号の分別解体等の計画には、次に掲げる事項を記載しなければならない。

一

建築物以外のものに係る解体工事又は新築工事等である場合においては、工事の種類

二

前項第一号の調査の結果

三

前項第三号の措置の内容

四

解体工事である場合においては、工事の工程の順序並びに当該工程ごとの作業内容及び分別解体等の方法並びに当該順序が次項本文、第四項本文及び第五項本文に規定する順序により難い場合にあってはその理由

五

新築工事等である場合においては、工事の工程ごとの作業内容

六

解体工事である場合においては、対象建築物等に用いられた特定建設資材に係る特定建設資材廃棄物の種類ごとの量の見込み及びその発生が見込まれる当該対象建築物等の部分

七

新築工事等である場合においては、当該工事に伴い副次的に生ずる特定建設資材廃棄物の種類ごとの量の見込み並びに当該工事の施工において特定建設資材が使用される対象建築物等の部分及び当該特定建設資材廃棄物の発生が見込まれる対象建築物等の部分

八

前各号に掲げるもののほか、分別解体等の適正な実施を確保するための措置に関する事項

3

建築物に係る解体工事の工程は、次に掲げる順序に従わなければならない。
ただし、建築物の構造上その他解体工事の施工の技術上これにより難い場合は、この限りでない。

一

建築設備、内装材その他の建築物の部分(屋根ふき材、外装材及び構造耐力上主要な部分(建築基準法施行令(昭和二十五年政令第三百三十八号)第一条第三号に規定する構造耐力上主要な部分をいう。以下同じ。)を除く。)の取り外し

二

屋根ふき材の取り外し

三

外装材並びに構造耐力上主要な部分のうち基礎及び基礎ぐいを除いたものの取り壊し

四

基礎及び基礎ぐいの取り壊し

4

前項第一号の工程において内装材に木材が含まれる場合には、木材と一体となった石膏ボードその他の建設資材(木材が廃棄物となったものの分別の支障となるものに限る。)をあらかじめ取り外してから、木材を取り外さなければならない。
この場合においては、前項ただし書の規定を準用する。

5

建築物以外のもの(以下「工作物」という。)に係る解体工事の工程は、次に掲げる順序に従わなければならない。
この場合においては、第三項ただし書の規定を準用する。

一

さく、照明設備、標識その他の工作物に附属する物の取り外し

二

工作物のうち基礎以外の部分の取り壊し

三

基礎及び基礎ぐいの取り壊し

6

解体工事の工程に係る分別解体等の方法は、次のいずれかの方法によらなければならない。

一

手作業

二

手作業及び機械による作業

7

前項の規定にかかわらず、建築物に係る解体工事の工程が第三項第一号の工程又は同項第二号の工程である場合には、当該工程に係る分別解体等の方法は、手作業によらなければならない。
ただし、建築物の構造上その他解体工事の施工の技術上これにより難い場合においては、手作業及び機械による作業によることができる。

(指定建設資材廃棄物の再資源化をするための施設までの距離に関する基準)
第三条

法第十六条の主務省令で定める距離に関する基準は、五十キロメートルとする。

(地理的条件、交通事情その他の事情により再資源化に代えて縮減をすれば足りる場合)
第四条

法第十六条の主務省令で定める場合は、対象建設工事の現場付近から指定建設資材廃棄物の再資源化をするための施設までその運搬の用に供する車両が通行する道路が整備されていない場合であって、当該指定建設資材廃棄物の縮減をするために行う運搬に要する費用の額がその再資源化(運搬に該当するものに限る。)に要する費用の額より低い場合とする。

(発注者への報告)
第五条

法第十八条第一項の規定により対象建設工事の元請業者が当該工事の発注者に報告すべき事項は、次に掲げるとおりとする。

一

再資源化等が完了した年月日

二

再資源化等をした施設の名称及び所在地

三

再資源化等に要した費用

(発注者への報告に係る情報通信の技術を利用する方法)
第六条

法第十八条第三項の主務省令で定める方法は、次に掲げる方法とする。

一

電子情報処理組織を使用する方法のうちイ又はロに掲げるもの

イ

対象建設工事の元請業者の使用に係る電子計算機と当該工事の発注者の使用に係る電子計算機とを接続する電気通信回線を通じて送信し、受信者の使用に係る電子計算機に備えられたファイルに記録する方法

ロ

対象建設工事の元請業者の使用に係る電子計算機に備えられたファイルに記録された同条第一項に規定する書面に記載すべき事項を電気通信回線を通じて当該工事の発注者の閲覧に供し、当該工事の発注者の使用に係る電子計算機に備えられたファイルに当該書面に記載すべき事項を記録する方法(同条第三項前段に規定する方法による通知を受ける旨の承諾又は受けない旨の申出をする場合にあっては、対象建設工事の元請業者の使用に係る電子計算機に備えられたファイルにその旨を記録する方法)

二

磁気ディスク等をもって調製するファイルに同条第一項に規定する書面に記載すべき事項を記録したものを交付する方法

2

前項に掲げる方法は、当該工事の発注者がファイルへの記録を出力することによる書面を作成することができるものでなければならない。

3

第一項第一号の「電子情報処理組織」とは、対象建設工事の元請業者の使用に係る電子計算機と、当該工事の発注者の使用に係る電子計算機とを電気通信回線で接続した電子情報処理組織をいう。

第七条

建設工事に係る資材の再資源化等に関する法律施行令(以下「令」という。)第六条第一項の規定により示すべき方法の種類及び内容は、次に掲げる事項とする。

一

前条第一項に規定する方法のうち対象建設工事の元請業者が使用するもの

二

ファイルへの記録の方式

(報告の徴収に関する事項)
第八条

令第七条第三項第三号の主務省令で定める事項は、法第十三条第一項及び第二項の規定により交付した書面又は同条第三項の規定により講じた措置に関する事項その他特定建設資材廃棄物の再資源化等に関し都道府県知事が必要と認める事項とする。

附 則

この省令は、法附則第一条第二号に掲げる規定の施行の日(平成十四年五月三十日)から施行する。

附 則

(施行期日)
第一条

この省令は、平成二十二年四月一日から施行する。

(対象建設工事に関する経過措置)
第二条

この省令による改正後の建設工事に係る資材の再資源化等に関する法律施行規則第二条第四項の規定は、この省令の施行の際既に着手している対象建設工事については、適用しない。

附 則

この省令は、令和三年九月一日から施行する。

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.