NLBWBR0006253Enacted

Nadere regels aanduiding van batterijen en accu's die kwik, cadmium of lood bevatten

Jurisdiction:
Netherlands
Type:
Labeling · EPR
Last action:
Jan 1, 1994
BatteriesHazardous Materials
Next steps for producers

Confirm your obligations under this measure and track its implementing rules

Applies toAny person who manufactures batteries or accumulators, imports batteries or accumulators into the Netherlands, manufactures appliances containing batteries, or imports appliances containing batteries into the Netherlands

Obligations under this law
  • ·Apply a separate collection symbol (crossed-out wheeled bin) to batteries or accumulators containing mercury, cadmium, or lead
  • ·Apply the chemical symbol of the relevant metal (Hg, Cd, or Pb) to batteries or accumulators
  • ·Ensure the collection symbol covers 3% of the surface area of the largest side of the battery/accumulator, or 3% of half the total lateral surface for round batteries/accumulators, with a maximum of 25 cm²
Program page →

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

Establishes mandatory labeling and marking requirements for batteries/accumulators containing mercury, cadmium, or lead, with responsibility placed on manufacturers and importers—a foundational EPR/product stewardship measure for hazardous battery management and separate collection.
Covered Products
  • ·Batteries and accumulators containing mercury (Hg)
  • ·Batteries and accumulators containing cadmium (Cd)
  • ·Batteries and accumulators containing lead (Pb)
  • ·Appliances/devices containing one or more batteries with the above substances
Producer Obligations
  • ·Apply a separate collection symbol (crossed-out wheeled bin) to batteries or accumulators containing mercury, cadmium, or lead
  • ·Apply the chemical symbol of the relevant metal (Hg, Cd, or Pb) to batteries or accumulators
  • ·Ensure the collection symbol covers 3% of the surface area of the largest side of the battery/accumulator, or 3% of half the total lateral surface for round batteries/accumulators, with a maximum of 25 cm²
  • ·Ensure the chemical symbol has a surface area of at least 25% of the surface area of the collection symbol, placed beneath the collection symbol
  • ·Apply markings directly on the battery or accumulator; if the collection symbol would be smaller than 0.25 cm², apply both symbols on the packaging instead, with the collection symbol sized at 1 cm²
  • ·Ensure all markings are clearly visible, legible, and indelible
  • ·Manufacturers or importers of appliances containing batteries must ensure those batteries carry the required markings
  • ·Refrain from applying any marking that is misleading with respect to the required labelling
Exemptions
  • ·Batteries and accumulators already manufactured or imported into the European Communities before 1 January 1994 are exempt from the labelling requirement until 1 January 1996
Key Deadlines
Jan 1, 1994compliance: Regulation enters into force; labelling obligations apply from this date
Jan 1, 1996compliance: End of transitional period: batteries or accumulators already manufactured or imported into the European Communities before 1 January 1994 are exempt from the labelling prohibition until this date
Producer Definition
Any person who manufactures batteries or accumulators, imports batteries or accumulators into the Netherlands, manufactures appliances containing batteries, or imports appliances containing batteries into the Netherlands
Enforcement
Ministry of Housing, Spatial Planning and the Environment (VROM): Misleading labelling with respect to the required markings is explicitly prohibited; specific penalties not detailed in this measure
Preemption Notes
This regulation implements EU Directive 93/86/EEC adapting Directive 91/157/EEC to technical progress; obligations are harmonised at EU level
Compliance Dimensions
Bans & RestrictionsMisleading labeling of batteries or accumulators with respect to the required marking (Sales Ban), 1994

“Het aanduiden van een batterij of accu op een wijze die misleidend is ten aanzien van de aanduiding, bedoeld in artikel 2, is verboden.”

LabelingDisposal Instructions, Material Id, Other

“De aanduiding op batterijen of accu's bestaat uit een teken voor gescheiden inzameling en een teken dat de aanwezigheid van de metalen kwik, cadmium of lood aangeeft. Het teken voor gescheiden inzameling, bedoeld in artikel 3, heeft een oppervlakte van 3% van de oppervlakte van de grootste zijde van de batterij of accu of, ingeval van een ronde batterij of accu, van 3% van de helft van de totale zij-oppervlakte van de batterij of de accu. De maximale oppervlakte van het teken bedraagt 25 cm². Het chemisch symbool, dat ingevolge artikel 4 als teken op de batterij of accu wordt aangebracht, heeft een oppervlakte van ten minste 25% van de oppervlakte van het inzamelteken. Het wordt aangebracht onder het inzamelteken. De tekens zijn zodanig aangebracht dat ze goed zichtbaar zijn, duidelijk leesbaar en onuitwisbaar.”

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

View Source ↗

The original source page moved — this is the updated link.

Full bill text

Nadere regels aanduiding van batterijen en accu's die kwik, cadmium of lood bevatten
Nadere regels aanduiding van batterijen en accu's die kwik, cadmium of lood bevatten

De Minister van Volkshuisvesting, Ruimtelijke Ordening en Milieubeheer,

Gelet op richtlijn nr. 93/86/EEG van de Commissie van de Europese Gemeenschappen van 4 oktober 1993 betreffende aanpassing aan de technische vooruitgang van Richtlijn 91/157/EEG van de Raad inzake batterijen en accu's die gevaarlijke stoffen bevatten (PbEG L 264,51) en op artikel 3, eerste en tweede lid, en artikel 5, tweede lid, van het koninklijk besluit van 15 september 1992 tot vaststelling van regels inzake batterijen en accu's die kwik, cadmium of lood bevatten (Stb. 486);

Besluit:

Artikel
1

In deze regeling wordt verstaan onder:

besluit:

het koninklijk besluit van 15 september 1992 (Stb. 486) tot vaststelling van regels inzake batterijen en accu's die kwik, cadmium of lood bevatten;

aanduiding:

de aanduiding, bedoeld in artikel 3, eerste lid, van het besluit.

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Artikel
2

1
De aanduiding op batterijen of accu's bestaat uit een teken voor gescheiden inzameling en een teken dat de aanwezigheid van de metalen kwik, cadmium of lood aangeeft.

2
De aanduiding wordt aangebracht door degene die de batterijen of accu's vervaardigt of in Nederland invoert.

3
Onverminderd het bepaalde in het tweede lid, draagt degene die apparaten vervaardigt of in Nederland invoert, die een of meer batterijen bevatten, ervoor zorg dat deze batterijen zijn voorzien van een aanduiding.

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Artikel
3

1
Het teken voor gescheiden inzameling bestaat uit een afbeelding van een afvalbak met een kruis erdoor, zoals aangegeven in de bij deze regeling behorende bijlage .

2
Degene die ingevolge artikel 2 de batterijen of accu's voorziet van het teken, bepaalt welke van de twee afbeeldingen, aangegeven in de bij deze regeling behorende bijlage , voor de betrokken batterijen of accu's als inzamelteken geldt.

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Artikel
4

1
Het teken dat de aanwezigheid van de metalen kwik, cadmium of lood in batterijen of accu's aangeeft, bestaat uit het chemisch symbool voor het metaal dat in de betrokken batterijen of accu's aanwezig is.

2
Het chemisch symbool is:

a.
voor kwik: Hg,

b.
voor cadmium: Cd,

c.
voor lood: Pb.

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Artikel
5

1
Het teken voor gescheiden inzameling, bedoeld in artikel 3 , heeft een oppervlakte van 3% van de oppervlakte van de grootste zijde van de batterij of accu of, ingeval van een ronde batterij of accu, van 3% van de helft van de totale zij-oppervlakte van de batterij of de accu. De maximale oppervlakte van het teken bedraagt 25 cm².

2
Het chemisch symbool, dat ingevolge artikel 4 als teken op de batterij of accu wordt aangebracht, heeft een oppervlakte van ten minste 25% van de oppervlakte van het inzamelteken. Het wordt aangebracht onder het inzamelteken.

3
De tekens, bedoeld in het eerste en tweede lid, worden aangebracht op de batterij of de accu.

4
Indien de oppervlakte van het inzamelteken minder is dan 0,25 cm², worden het inzamelteken en het symbool, bedoeld in artikel 4 , aangebracht op de verpakking. De oppervlakte van het inzamelteken bedraagt in dat geval 1 cm².

4
De tekens zijn zodanig aangebracht dat ze goed zichtbaar zijn, duidelijk leesbaar en onuitwisbaar.

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Artikel
6

Het aanduiden van een batterij of accu op een wijze die misleidend is ten aanzien van de aanduiding, bedoeld in artikel 2 , is verboden.
1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Artikel
7

Ten aanzien van batterijen of accu's die op 1 januari 1994 reeds in de Europese Gemeenschappen zijn vervaardigd of ingevoerd, blijft het verbod, bedoeld in artikel 3, eerste lid, van het besluit tot 1 januari 1996 buiten toepassing.
1993 247 23-12-1993 20-12-1993 MBA 17d93009 1993 247 23-12-1993 20-12-1993 MBA 17d93009 01-01-1994

Artikel
8

Deze regeling treedt in werking met ingang van 1 januari 1994.
Deze regeling zal met de toelichting in de Staatscourant worden geplaatst.
1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

's-Gravenhage
15 november 1993

De Minister van Volkshuisvesting, Ruimtelijke Ordening en Milieubeheer , J. G. M. Alders

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Bijlage

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

1993 223 19-11-1993 15-11-1993 DGM/A12N93043 1993 223 19-11-1993 15-11-1993 DGM/A12N93043 01-01-1994

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.