Batteries and Accumulators Regulations, 2007 (L.N. 311 of 2007)
- Jurisdiction:
- Malta
- Type:
- EPR · Labeling · Disposal Ban
- Last action:
- Jan 1, 2007
Review this measure’s obligations and confirm whether they reach your products
Applies toNot explicitly defined in the extracted text
- ·Comply with labelling requirements: mark batteries, accumulators and battery packs with the crossed-out wheeled bin symbol for separate collection
- ·Mark batteries containing more than 0.0005% mercury by weight, or cadmium or lead above thresholds with the relevant chemical symbol (Hg, Cd, Pb) beneath the crossed-out wheeled bin symbol
- ·Ensure the crossed-out wheeled bin symbol covers at least 3% of the area of the largest side of the battery/accumulator/battery pack (up to maximum 5x5 cm); for cylindrical cells at least 1.5% of surface area (up to 5x5 cm)
No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.
- ·All types of batteries and accumulators regardless of shape, volume, weight, material composition or use
- ·Automotive batteries and accumulators (starter, lighting, ignition)
- ·Batteries and accumulators incorporated into appliances
- ·Comply with labelling requirements: mark batteries, accumulators and battery packs with the crossed-out wheeled bin symbol for separate collection
- ·Mark batteries containing more than 0.0005% mercury by weight, or cadmium or lead above thresholds with the relevant chemical symbol (Hg, Cd, Pb) beneath the crossed-out wheeled bin symbol
- ·Ensure the crossed-out wheeled bin symbol covers at least 3% of the area of the largest side of the battery/accumulator/battery pack (up to maximum 5x5 cm); for cylindrical cells at least 1.5% of surface area (up to 5x5 cm)
- ·Where the symbol would be smaller than 0.5x0.5 cm on the product, print a symbol of at least 1x1 cm on the packaging instead
- ·Ensure symbols are printed visibly, legibly and indelibly
- ·Batteries and accumulators used in essential security interests, arms, munitions and war material (excluding products not intended for specifically military purposes)
- ·Batteries and accumulators used in emergency and alarm systems, including emergency lighting
- ·Batteries and accumulators covered by Waste Management (End of Life Vehicles) Regulations, 2004 (L.N. 99 of 2004) — applied without prejudice
- ·Batteries and accumulators covered by Waste Management (Electrical and Electronic Equipment) Regulations, 2007 (L.N. 63 of 2007) — applied without prejudice
- ·Batteries and accumulators that are sealed (specific exemption context not fully extractable from truncated text)
“all batteries or accumulators, whether or not incorporated into appliances, that contain more than 0,0005 % of mercury by weight”
“Hg, Cd or Pb. The symbol indicating the heavy metal content shall be printed beneath the symbol shown in the First Schedule hereto and shall cover an area of at least one-quarter the size of that symbol. (4) The symbol shown in the First Schedule hereto shall cover at least 3 % of the area of the largest side of the battery, accumulator or battery pack, up to a maximum size of 5 X 5 cm. In the case of cylindrical cells, the symbol shall cover at least 1,5 % of the surface area of the battery or accumulator and shall have a maximum size of 5 X 5 cm. (5) Where the size of the battery, accumulator or battery pack is such that the symbol would be smaller than 0,5 X 0,5 cm, the battery, accumulator or battery pack need not be marked but a symbol measuring at least 1 X 1 cm shall be printed on the packaging. (6) Symbols shall be printed visibly, legibly and indelibly.”
Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.
Full bill text
B 3949 L.N. 311 of 2007 PRODUCT SAFETY ACT (CAP. 427) Batteries and Accumulators Regulations, 2007 IN exercise of the powers conferred by article 39 of the Product Safety Act, the Minister for Competitiveness and Communications has, on the advice of the Malta Standards Authority, made the following regulations>- 1. The title of these regulations is the Batteries and Accumulators Regulations, 2007. 2. These regulations implement the provisions of Directive 2006#66#EC of the European Parliament and of the Council of the 6 th September, 2006, and shall enter into force on the 26th September 2008. 3. (1) These regulations shall apply to all types of batteries and accumulators, regardless of their shape, volume, weight, material composition or use. It shall apply without prejudice to the Waste Management (End of Life Vehicles) Regulations, 2004 1 and to the Waste Management (Electrical and Electronic Equipment) Regulations, 2007 2. (2) These regulations shall not apply to batteries and accumulators used in> (a) essential security interests, arms, munitions and war material, with the exclusion of products that are not intended for specifically military purposes Title. Commencement and scope. Applicability. Definitions. _________________________________ 1 L.N. 99 of 2004 2 L.N. 63 of 2007 Suppliment tal-Gazzetta tal-Gvern ta’ Malta, Nru. 18,138, 23 ta’ Ottubru, 2007 Taqsima B –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– B 3950 1. “automotive battery or accumulator” means any battery or accumulator used for automotive starter, lighting or ignition power (i) is sealed (a) all batteries or accumulators, whether or not incorporated into appliances, that contain more than 0,0005 % of mercury by weight (a) emergency and alarm systems, including emergency lighting Hg, Cd or Pb. The symbol indicating the heavy metal content shall be printed beneath the symbol shown in the First Schedule hereto and shall cover an area of at least one-quarter the size of that symbol. (4) The symbol shown in the First Schedule hereto shall cover at least 3 % of the area of the largest side of the battery, accumulator or battery pack, up to a maximum size of 5 X 5 cm. In the case of cylindrical cells, the symbol shall cover at least 1,5 % of the surface area of the battery or accumulator and shall have a maximum size of 5 X 5 cm. (5) Where the size of the battery, accumulator or battery pack is such that the symbol would be smaller than 0,5 X 0,5 cm, the battery, accumulator or battery pack need not be marked but a symbol measuring at least 1 X 1 cm shall be printed on the packaging. (6) Symbols shall be printed visibly, legibly and indelibly. 7. The Batteries and Accumulators Order, 2001 (Order No. 50 of 2001) is hereby repealed. Labelling. Repeals L.N. 6 of 2001. B 3952 FIRST SCHEDULE SYMBOL FOR BATTERIES, ACCUMULATORS AND BATTERY PACKS FOR SEPARATE COLLECTION The symbol indicating “separate collection” for all batteries and accumulators shall be the crossed-out wheeled bin shown below. _______________________________________________________________________________________________________________________ Ippubblikat mid-Dipartiment ta’ l-Informazzjoni (doi.gov.mt) — Valletta — Published by the Department of Information (doi.gov.mt) — Valletta Mitbug[ fl-Istamperija tal-Gvern — Printed at the Government Printing Press Prezz#Price Lm0.08 (€0.19)
Full text as ingested. Verify against the official source above.