AT2023/0418/ATIntroduced

Ordinance of the Federal Minister for Climate Protection, Environment, Energy, Mobility, Innovation and Technology on the End-of-Waste of Refractory Waste

Jurisdiction:
Austria
Type:
Other
Last action:
Jul 7, 2023
Hazardous MaterialsOther
Next steps for producers

Review this measure’s obligations and confirm whether they reach your products

Applies toWaste holders of refractory waste who seek to declare end-of-waste status for refractory waste

Obligations under this law
  • ·Comply with quality requirements for refractory waste to achieve end-of-waste status
  • ·Comply with treatment requirements for refractory waste to achieve end-of-waste status
  • ·Comply with quality assurance requirements to ensure a high level of environmental protection

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

End-of-waste criteria for refractory waste enable closed-loop material recovery and cascading use by establishing quality/treatment standards that allow waste to re-enter production cycles; this is a circular-economy material-recovery mechanism, though not a producer-responsibility or disposal-ban instrument.
Covered Products
  • ·Refractory waste (e.g., from furnace demolition), including refractory materials used in furnace claddings
Producer Obligations
  • ·Comply with quality requirements for refractory waste to achieve end-of-waste status
  • ·Comply with treatment requirements for refractory waste to achieve end-of-waste status
  • ·Comply with quality assurance requirements to ensure a high level of environmental protection
  • ·Declare end-of-waste status in accordance with the ordinance before placing the material back into circulation
Key Deadlines
Oct 10, 2023compliance: End of EU standstill period; ordinance may be adopted after this date
Producer Definition
Waste holders of refractory waste who seek to declare end-of-waste status for refractory waste
Preemption Notes
This is a draft technical regulation notified under Directive (EU) 2015/1535; standstill period ends 2023-10-10. No basic text available. The ordinance establishes end-of-waste criteria under Austrian law, consistent with EU waste framework.

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

Full bill text

TRIS notification 2023/0418/AT — draft technical regulation notified under Directive (EU) 2015/1535 (not yet adopted)

Ordinance of the Federal Minister for Climate Protection, Environment, Energy, Mobility, Innovation and Technology on the End-of-Waste of Refractory Waste

End of standstill: 2023-10-10

1. MSG 001 IND 2023 0418 AT EN 07-07-2023 AT NOTIF
2. Austria
4. 2023/0418/AT - S20E - Waste
5. Ordinance of the Federal Minister for Climate Protection, Environment, Energy, Mobility, Innovation and Technology on the End-of-Waste of Refractory Waste
6. Refractory waste
7.
8. The End of Waste Regulation for refractory waste contains the specifications for the quality and treatment of refractory waste, including quality assurance specifications, where a high level of environmental protection can be ensured and the waste holder reaches the end-of-waste status of this waste.
9. Refractory waste occurs e.g. when furnaces are demolished. These wastes are generally very suitable for use as a refractory material in the production of new refractory products e.g. for furnace claddings. This allows for a closed-loop circulation of this material. Therefore, in compliance with specific quality, treatment and quality assurance requirements that ensure a high level of environmental protection, the waste holder of refractory waste should be able to declare the end-of-waste and lead this material into the loop.
10. Reference to the basic texts: No basic text available
11. No
12.
13. No
14. No
15. Yes
16.
TBT aspects: No
SPS aspects: No

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.