INgsr-571e-2021Enacted

India Plastic Waste Management (Amendment) Rules, 2021 (G.S.R. 571(E)) — single-use plastic ban list from 1 July 2022 (plates, cups, glasses, cutlery, straws, stirrers, trays, sweet-box wrap, EPS decoration), carry bags 75 then 120 microns

Jurisdiction:
India
Type:
Disposal Ban
Last action:
Aug 12, 2021
Plastic Packaging
Next steps for producers

Confirm your obligations with Central Pollution Control Board (CPCB) and track its implementing rules

Applies toProducers, manufacturers, brand owners, importers, plastic waste processors (recyclers, co-processors, etc.) as defined under the Plastic Waste Management Rules, 2016 as amended

Obligations under this law
  • ·Manufacturers, importers, brand owners must not manufacture, import, stock, distribute, sell or use single-use plastic commodities prohibited from 1 July 2022
  • ·Carry bags must not be less than 75 microns in thickness with effect from 30 September 2021
  • ·Carry bags must not be less than 120 microns in thickness with effect from 31 December 2022
Central Pollution Control Board (CPCB) →

No designated program action is recorded for this measure yet — treat the above as the general obligation and verify against the source text.

Amendment establishes a single-use plastic ban on specified items (plates, cups, glasses, cutlery, straws, stirrers, trays, sweet-box wrap, EPS decoration) and carry-bag thickness thresholds, effective 1 July 2022; a disposal-ban mechanism that advances circular-economy policy by restricting end-of-life disposal of targeted plastic products.
Covered Products
  • ·Plastic carry bags
  • ·Non-woven plastic carry bags
  • ·Single-use plastic commodities including: ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks, ice-cream sticks, polystyrene (Thermocol) for decoration
  • ·Plates, cups, glasses, cutlery (forks, spoons, knives), straws, trays, wrapping or packing films around sweet boxes, invitation cards, and cigarette packets, plastic or PVC banners less than 100 micron, stirrers
  • ·Polystyrene and expanded polystyrene commodities
  • ·Plastic packaging
  • ·Multi-layered packaging
Producer Obligations
  • ·Manufacturers, importers, brand owners must not manufacture, import, stock, distribute, sell or use single-use plastic commodities prohibited from 1 July 2022
  • ·Carry bags must not be less than 75 microns in thickness with effect from 30 September 2021
  • ·Carry bags must not be less than 120 microns in thickness with effect from 31 December 2022
  • ·Non-woven plastic carry bags must not be less than 60 GSM with effect from 30 September 2021
  • ·Producers and brand owners must ensure adherence to the provisions of the rules as amended (Rule 6)
  • ·Manufacturers, producers, and brand owners must ensure adherence to the provisions of the rules as amended (Rule 7)
  • ·Plastic carry bags and plastic packaging must bear the name and certificate number of the producer (Rule 11)
  • ·Brand owners must account for plastic packaging used by them (Rule 11)
Exemptions
  • ·Commodities made of compostable plastic are exempt from the prohibition on plates, cups, glasses, cutlery, straws, trays, wrapping/packing films, invitation cards, cigarette packet wrapping, PVC banners less than 100 micron, and stirrers (sub-rule 2(b) items only)
  • ·Multi-layered packaging used for imported goods is excluded from certain labeling/marking requirements under Rule 11(b)
Key Deadlines
Sep 30, 2021compliance: Carry bags must be at least 75 microns in thickness; non-woven plastic carry bags must be at least 60 GSM
Jul 1, 2022compliance: Prohibition on manufacture, import, stocking, distribution, sale and use of specified single-use plastic commodities including plates, cups, glasses, cutlery, straws, stirrers, trays, sweet-box wrapping films, EPS decoration items, ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks, ice-cream sticks, PVC banners less than 100 micron
Dec 31, 2022compliance: Carry bags must be at least 120 microns in thickness
Producer Definition
Producers, manufacturers, brand owners, importers, plastic waste processors (recyclers, co-processors, etc.) as defined under the Plastic Waste Management Rules, 2016 as amended
Fee Structure
Unknown: No fee structure specified in this amendment
Enforcement
Central Pollution Control Board; State Pollution Control Boards; Union Territory Pollution Control Committees (as referenced in Rule 13 amendment adding CPCB as an additional authority): Not specified in this amendment; penalties are governed by the Environment (Protection) Act, 1986 and the principal Plastic Waste Management Rules, 2016
Preemption Notes
Sub-rule (4) inserted in Rule 4 provides that any future notification prohibiting manufacture, import, stocking, distribution, sale and use of carry bags, plastic sheets, multi-layered packaging and single-use plastic commodities issued after this notification shall come into force only after the expiry of ten years from the date of its publication, providing a degree of regulatory stability
Compliance Dimensions
Bans & RestrictionsCarry bags below 75 microns thickness (Material Restriction), 2021; Non-woven plastic carry bags below 60 GSM (Material Restriction), 2021; Ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks, ice-cream sticks, polystyrene (Thermocol) for decoration (Sales Ban), 2022

“(2) The manufacture, import, stocking, distribution, sale and use of following single-use plastic, including polystyrene and expanded polystyrene, commodities shall be prohibited with effect from the 1st July, 2022:- (a) ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks, ice-cream sticks, polystyrene [Thermocol] for decoration; (b) plates, cups, glasses, cutlery such as forks, spoons, knives, straw, trays, wrapping or packing films around sweet boxes, invitation cards, and cigarette packets, plastic or PVC banners less than 100 micron, stirrers.”

LabelingMaterial Id

“in clause (a), after the word "manufacturer", the words " producer or brand-owner" shall be inserted, and after the words "carry bag", the words "and plastic packaging used by the brand owner" shall be inserted; in clause (c), after the words "name and certificate number", the words "of producer" shall be inserted.”

Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.

Full bill text

xxxGIDHxxx
xxxGIDExxx
EXTRAORDINARY
PART II—Section 3—Sub-section (i)
PUBLISHED BY AUTHORITY
No. 459] NEW DELHI, THURSDAY, AUGUST 12, 2021/SHRAVANA 21, 1943
2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
MINISTRY OF ENVIRONMENT, FOREST AND CLIMATE CHANGE
NOTIFICATION
New Delhi, the 12th August, 2021
G.S.R. 571(E).—Whereas the draft rules to amend the Plastic s Waste Management Rules, 2016,
were published in the Gazette of India, Extraordinary, dated the 11th March, 2021 vide notification number
GSR 169 (E), inviting objections and suggestions from all persons likely to be affected thereby within a
period of sixty days from the date copies of the Gazette containing the said draft rules were made available
to the public;
And whereas, copies of the Gazette containing the said draft rules were made available to the
public on the 11th March, 2021;
And whereas, obj ections and suggestions received within the aforesaid period have been duly
considered by the Central Government;
Now, therefore, in exercise of the powers conferred by sections 6, 8 and 25 of Environment
(Protection) Act 1986, (29 of 1986), the Central G overnment hereby makes the following rules to amend
the Plastic Waste Management Rules, 2016, namely :-
1. (1) These rules may be called Plastic Waste Management (Amendment) Rules, 2021.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. In the Plastic Waste Management Rules,2016 (hereinafter referred to as the said rules), in rule 2,
in sub-rule (1), after the word “Importers”, the words, “brand -owner, plastic waste processor (recycler,
co-processor, etc.)” shall be inserted.
3. In the said rules, in rule 3,
(i) after clause (n), the following clause shall be inserted, namely :-
„(na) “Non-woven plastic bag” means Non-woven plastic bag made up of plastic sheet or
web structured fabric of entangled plastic fibers or filaments (and by perforating films)
bonded together by mechanical or thermal or chemical means, and the “non -woven
fabric” means a flat or tufted porous sheet that is made directly from plastic fibres,
molten plastic or plastic films;‟
(ii) after clause (q), the following clause shall be inserted, namely: -
„(qa) “Plastic waste processing” means any process by which plastic waste is handled for
the purpose of reuse, recycling, co-processing or transformation into new products;‟
(iii) after clause (v), the following clauses shall be inserted, namely: -
„(va) “Single-use plastic commodity” mean a plastic item intended to be used once for the
same purpose before being disposed of or recycled;‟
„(vb) “Thermoset plastic” means a plastic which becom es irreversibly rigid when heated
and hence cannot be remoulded into desired shape;‟
„(vc) “Thermoplastic” means a plastic which softens on heating and can be moulded into
desired shape;‟.
4. In the said rules, in rule 4, -
(a) in sub-rule (1),−
(i) for t he words “importer stocking”, the words “import, stocking” shall be
substituted;
(ii) in clause (c), for the words “fifty microns in thickness” , the words, figures, letters
and brackets “seventy five microns in thickness with effect from the 30 th September,
2021and one hundred and twenty (120) microns in thickness with effect from the
31st December, 2022” shall be substituted;
(iii) in clause (h), after the words, “carry bags”, the words “and commodities” shall be
inserted;
(iv) in c lause (h), after the words, “ compostable plastic carry bags”, the words “or
commodities or both” shall be inserted;
(v) after clause (i), following clause shall be inserted, namely: -
“ ( j) non-woven plastic carry bag shall not be less than 60 Gr am Per Square Meter (GSM)
with effect from the 30th September, 2021.”;
(b) after sub-rule (1), the following sub-ules shall be inserted, namely:-
“(2) The manufacture, import, stocking, distribution, sale and use of following single -
use plastic, i ncluding polystyrene and expanded polystyrene, commodities shall be
prohibited with effect from the 1st July, 2022:-
(a) ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks,
ice-cream sticks, polystyrene [Thermocol] for decoration;
(b) plates, cups, glasses, cutlery such as forks, spoons, knives, straw, trays, wrapping or
packing films around sweet boxes, invitation cards, and cigarette packets, plastic or
PVC banners less than 100 micron, stirrers.
(3) The provisions of sub -rule (2) (b) shall not apply to commodities made of
compostable plastic.
(4) Any notification prohibiting the manufacture, import, stocking, distribution, sale and
use of carry bags, plastic sheets or like, or cover made of plastic sheets and multi -
layered packaging and single -use plastic, including polystyrene and expanded
polystyrene, commodities, issued after this notification, shall come into force after the
expiry of ten years, from the date of its publication”.
5. In the said r ules, in rule 5, in sub -rule (1), in clause (d), for the figures “2000”, the figures
“2016” shall be substituted.
6. In the said rules, in rule 6, in sub -rule (2), after clause (a), following clause shall be inserted,
namely: -
“(aa) ensuring that the provisions of these rules, as amended, are adhered to;”.
7. In the said rules, in rule 7, in sub -rule (1), after clause (a), following clause shall be inserted,
namely : -
“(aa) ensuring that the provisions of these rules, as amended, are adhered to;”.
8. In the said rules, in rule 9, in sub -rule (1), after the words, “local body concerned”, the words “ as
per guidelines issued under these rules from time to time” shall be inserted.
9. In rule 11, sub-rule (1), −
(i) after the words “plastic carry bag”, the words, “plastic packaging” shall be
inserted;
(ii) in clause (a), after the word “manufacturer”, the words “ producer or brand -
owner” shall be inserted, and after the words “carry bag”, the words “and plastic
packaging used by the brand owner” shall be inserted;
(iii) in clause (b), after the words “multilayered packaging”, the words “ excluding
multi-layered packaging used for imported goods” shall be inserted;
(iv) in clause (c), after the words “name and certificate number”, the words “of
producer” shall be inserted.
10. In rule 12, −
(i) in sub -rule (2), after the words “waste generator,” ,the words “ restriction or
prohibition on” shall be inserted;
(ii) in sub-rule (3), after the words “waste generator,” ,the words “
restriction or prohibition on” shall be inserted.
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11. In rule 13, in sub -rule (1), after the words “Union Territory concerned”, the words “ or the Central
Pollution Control Board” shall be inserted.
[F. No. 17-2-2001 (Pt)-Part I -HSMD]
NARESH PAL GANGAWAR, Jt. Secy.
Note : The principal rules were published in the Gazette of India, Extraordinary, Part II, Section 3, Sub -
section (i), vide number GSR 320 (E), dated the 18th March, 2016 and subsequently amended vide
notification number GSR 285 (E), dated the 27th March, 2018.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.

Full text as ingested. Verify against the official source above.

Explore more circular-economy legislation on the Atlas Circular legislation tracker.