India Plastic Waste Management (Amendment) Rules, 2022 (G.S.R. 133(E)) — Guidelines on Extended Producer Responsibility for plastic packaging (Schedule II): categories I-IV, recycling and recycled-content targets, EPR certificates, CPCB centralized portal
- Jurisdiction:
- India
- Type:
- EPR · Recycled Content
- Last action:
- Feb 16, 2022
Register with CPCB — EPR Portal for Plastic Packaging
Applies toProducer means person engaged in manufacture or import of carry bags or multilayered packaging or plastic sheets or like, and includes industries or individuals using plastic sheets or like or covers made of plastic…
- ·Register on the CPCB centralized online EPR portal before commencing business
- ·Provide PAN Number, GST Number, CIN Number, Aadhar Number and PAN of authorized person at registration
- ·Submit Action Plan containing category-wise EPR targets on the centralized portal along with registration or renewal application
- ·Category I: Rigid plastic packaging
- ·Category II: Flexible plastic packaging of single layer or multilayer, plastic sheets or like and covers made of plastic sheet, carry bags, plastic sachet or pouches
- ·Category III: Multilayered plastic packaging (at least one layer of plastic and at least one layer of material other than plastic)
- ·Category IV: Plastic sheet or like used for packaging as well as carry bags made of compostable plastics
- ·Register on the CPCB centralized online EPR portal before commencing business
- ·Provide PAN Number, GST Number, CIN Number, Aadhar Number and PAN of authorized person at registration
- ·Submit Action Plan containing category-wise EPR targets on the centralized portal along with registration or renewal application
- ·Meet EPR collection/waste management targets category-wise (percentage of eligible quantity Q1/Q2/Q3) as per annual schedule
- ·Ensure minimum recycling levels of plastic packaging waste collected under EPR target (Category I: 50% by 2024-25 rising to 80% by 2027-28; Category II & III: 30% by 2024-25 rising to 60% by 2027-28; Category IV: 50% by 2024-25 rising to 80% by 2027-28)
- ·Ensure mandatory use of recycled plastic content in plastic packaging (Category I: 30% by 2024-25 rising to 60% by 2027-28; Category II: 10% by 2024-25 rising to 20% by 2026-27; Category III: 5% by 2024-25 rising to 10% by 2026-27)
- ·Ensure end-of-life disposal of non-recyclable plastic packaging waste only through methodologies specified in Rule 5(1)(b) of Plastic Waste Management Rules, 2016
- ·Brand Owners using Category I rigid plastic packaging must meet minimum reuse obligations (≥0.9L/<4.9L: 25% by 2028-29; ≥4.9L: 85% by 2028-29)
- ·File annual returns on plastic packaging waste collected and processed by 30th June of the next financial year
- ·Maintain records of category-wise quantities of plastic packaging sold to or purchased from other obligated entities
- ·Not carry on business without valid registration on the CPCB centralized portal
- ·Not deal with any entity not registered on the CPCB centralized portal
- ·Purchase EPR certificates from registered plastic waste processors to demonstrate compliance
- ·Purchase recycled-content certificates from other PIBOs if unable to meet recycled content obligations due to statutory requirements
- ·Record and submit EPR certificate transactions on the online portal while filing annual returns
- ·Pay Environmental Compensation in case of non-fulfilment of EPR targets
- ·Micro and small enterprises (as per MSME Ministry criteria) are excluded from Brand Owner obligations
- ·Entities starting business in a particular year and placing products in market in that year shall have EPR target obligations only from the next year
- ·Plastic packaging that is 100% biodegradable in the ambient environment leaving no traces of micro plastics or chemical residue, as certified by CPCB, BIS, and CIPET, is exempt from EPR targets
- ·Exemption from recycled content obligation may be granted by CPCB on case-to-case basis where statutory requirements prevent compliance; in such cases, obligation must be met through purchase of equivalent certificates from other PIBOs
- ·Reuse of Category I rigid plastic packaging in food contact applications is subject to FSSAI regulation
- ·Recycled plastic used in imported material shall not be counted towards fulfilment of importer's recycled content obligation
“(7.2)(a) Eligible Quantity in MT (Q1) shall be the average weight of plastic packaging material (category-wise) sold in the last two financial years (A) plus average quantity of pre-consumer plastic packaging waste in the last two financial years (B) minus the annual quantity (C) supplied to the entities covered under sub-clause 4 (iii) in the previous financial year as under:- Q1 (in MT) = (A + B) - and the Extended Producer Responsibility target shall be determined category-wise, as given below Extended Producer Responsibility target Year Extended Producer Responsibility target (as a percentage of Q1 - category-wise)”
“Mandatory use of recycled plastic in plastic packaging (% of plastic manufactured for the year) Plastic packaging category Category I 30 40 50 60 Category II 10 10 20 20 Category III 5 5 10 10 In cases, where it is not possible to meet the obligation in respect of recycled plastic content on account of statutory requirements, the exemption will be granted by Central Pollution Control Board on case-to-case basis. However, in such cases, the Producers, Importers & Brand-Owners will have to fulfil its obligation of use of recycled content (in quantitative terms) through purchase of certificate of equivalent quantity from such Producers, Importers & Brand-Owners who have used recycled content in excess of their obligation.”
“(7.7) Extended Producer Responsibility on plastic packaging will promote sustainable packaging, as per guidelines prepared by Central Pollution Control Board, inter alia based on the following criteria, (i) package designing promoting reuse; (ii) package designing amenable for recycling; (iii) recycled plastic content in plastic packaging material and; (iv) package designing for environment. (7.8) In case, the obligated entity utilizes plastic packaging which is 100% biodegradable in the ambient environment leaving no traces of micro plastics or chemical residue or any other traces having adverse environmental and health impacts as certified by regulatory entities Central Pollution Control Board, Bureau of Indian Standards, Central Institute of Petrochemicals Engineering & Technology, the Extended Producer Responsibility target will not be applicable for such material.”
“(12.2) The Central Pollution Control Board may charge fee for processing of applications for registration and an annual fee for processing of returns, as per procedure prescribed by CPCB. In case, where Producers, Importers & Brand-Owners, are operating in the jurisdiction of a State Pollution Control Board or Pollution Control Committee, the Central Pollution Control Board as per guidelines so decided, will share the application fee with the concerned State Pollution Control Board or Pollution Control Committee.”
“(9.1) Environmental Compensation shall be levied based upon polluter pays principle, with respect to non-fulfilment of Extended Producer Responsibility targets by Producers, Importers & Brand Owners, for the prupose of protecting and improving the quality of the environment and preventing, controlling and abating environment pollution. (9.5) Payment of environmental compensation shall not absolve the Producers, Importers & Brand-Owners of the obligations set out in these guidelines. The unfulfilled Extended Producer Responsibility obligations for a particular year will be carried forward to the next year for a period of three years. In case, the shortfall of Extended Producer Responsibility obligation is addressed within three years. The environmental compensation levied shall be returned to the Producers, Importers & Brand-Owners as given below, namely (i) Within one year of levying of EC: 75% return; (ii) Within two years 60% return; (iii) Within three years 40% return, After completion of three years on environmental compensation getting due the entire environmental compensation amount shall be forfeited.”
Tracking dates like these across a whole portfolio of jurisdictions is what Upcoming Deadlines does.
Full bill text
xxxGIDHxxx xxxGIDExxx EXTRAORDINARY PART II—Section 3—Sub-section (i) PUBLISHED BY AUTHORITY No. 131] NEW DELHI, WEDNESDAY, FEBRUARY 16, 2022/MAGHA 27, 1943 2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (ii) कोरट II (iii) कोरट III (iv) कोरट IV 6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] MINISTRY OF ENVIRONMENT, FOREST AND CLIMATE CHANGE NOTIFICATION New Delhi, the16th February, 2022 G.S.R. 133(E). —In exercise of the powers conferred by sections 3, 6, and 25 of the Environment (Protection) Act 1986 (29 of 1986), the Central Government hereby makes the following rules further to amend the Plastic Waste Management Rules, 2016, namely: - 1. (1) These rules may be called the Plastic Waste Management (Amendment) Rules, 2022. (2) They shall come into force on the date of their publication in the Official Gazette. 2. In the Plastic Waste Management Rules, 2016 (hereinafter referred to as the sa id rules), in rule 9, in sub -rule (1), for the words ―as per guidelines issued under these rules from time to time‖, the words ―as per guidelines specified in SCHEDULE – II‖ shall substituted. 3. In the said rules, after SCHEDULE – I, the following Schedule shall be inserted namely:- „SCHEDULE-II [See Rule 9 (1)] Guidelines on Extended Producer Responsibility for Plastic Packaging 1. Background: (1.1) The Ministry of Environment, Forest and Climate Change (MoEFCC), (hereinafter referred to as ‗The Ministry‘), notified the Plastic Waste Management Rules, 2016 on 18 th March, 2016. The Ministry also notified the Solid Waste Management Rules, 2016 on 8 th April, 2016. As plastic waste is part of solid waste, therefore, both the rules apply to managing plastic waste in the country. (1.2) The Plastic Waste Management Rules, 2016, mandate the generators of plastic waste to take steps to minimize generation of plastic waste, not to litter the plastic waste, ensure segregated storage of waste at source and hand ov er segregated waste in accordance with rules. The rules also mandate the responsibilities of local bodies, gram panchayats, waste generators, retailers and street v endors to manage plastic waste. (1.3) The Plastic Waste Management Rules, 2016 cast Extended Producer Responsibility on Producer, Importer, and Brand Owner. Extended Producer Responsibility shall be applicable to both pre -consumer and post -consumer plastic packaging waste. (1.4) These guidelines provides framework for implementation of Extended P roducer Responsibility. The Guidelines provide the roles and responsibilities of Producers, Importers, Brand Owners, Central Pollution Control Board, State Pollution Control Board or Pollution Control Committees, recyclers and waste processors for effectiv e implementation of Extended Producer Responsibility. The definitions given in Plastic Waste Management Rules, 2016, apply until, specifically mentioned in these guidelines; 2. Date of Coming into Effect: These guidelines shall come into force with immediate effect. The on -going processes related to Extended Producer Responsibility obligations will be aligned with these guidelines. 3. Definitions: (a) ― Biodegradable plastics ‖ means that plastics, other than compostable plastics, which undergoes complete degradation by biological processes under ambient environment (terrestrial or in water) conditions, in specified time periods, without leaving any micro plastics, or visible, distinguishable or toxic residue, which have adverse environment impacts, adhering t o laid down standards of Bureau of Indian Standards and certified by Central Pollution Control Board. (b) “Brand Owner” means a person or company who sells any commodity under a regist ered brand label or trade mark; (c) ―Carry Bags‖ (covered under Category II of plastic packaging – Clause (5.1) (II)) means bags made from plastic material or compostable plastic material, used for the purpose of carrying or dispensing commodities which have a self-carrying feature but do not include bags that constitute or fo rm an integral part of the packaging in which goods are sealed prior to use ; (d) ― End of Life disposal ‖ means using plastic waste for generation of energy and includes co -processing (e.g. in cement kilns) or waste to oil or for road construction as per Indian Road Congress guidelines, etc; (e) ― Extended Producer Responsibility ‖ means the responsibility of a producer for the environmentally sound management of the product until the end of its life; 22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (f) ―Importer‖ means a person who imports plastic packaging product or products with plastic packaging or carry bags or multilayered packaging or plastic sheets or like; (g) ― Plastic‖ means material which contains as an essential ingredient a high polymer such as polyethylene terephthalate, high density polyethyle ne, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi - materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate; (h) ― Plastic Packaging ‖ means packaging material made by using pla stics for protecting, preserving, storing and transporting of products in a variety of ways. (i) ―Plastic Sheet‖ means plastic sheet is the sheet made of plastic; (j) ― Plastic Waste Processors ‖ means recyclers and entities engaged in using plastic waste for energy (waste to energy), and converting it to oil (waste to oil), industrial composting. (k) ― Pre-consumer plastic packaging waste ‖ means plastic packaging waste generated in the form of reject or discard at the stage of manufacturing of plastic packagi ng and plastic packaging waste generated during the packaging of product including reject, discard, before the plastic packaging reaches the e nd-use consumer of the product. (l) ― Post-consumer plastic packaging waste” means plastic packaging waste generate d by the end -use consumer after the intended use of packaging is completed and is no longer being used for its intended purpose. (m) ―Producer‖ means person engaged in manufacture or import of carry bags or multilayered packaging or plastic sheets or like, and includes industries or individuals using plastic sheets or like or covers made of plastic sheets or multilayered packaging for packaging or wrapping the commodity; (n) ―Recyclers‖ are entities who are engaged in the process of recycling of plastic was te; (o) "Recycling" means the process of transforming segregated plastic waste into a new product or raw mater ial for producing new products; (p) ―Reuse‖ means using an object or resource material again for either the same purpose or another purpose withou t changing the object's structure; (q) ― Use of recycled plastic ‖ means recycled plastic, instead of virgin plastic, is used as raw material in the manufacturing process; (r) ― Waste Management ‖ means the collection, storage, transportation reduction, re -use, recovery, recycling, composting or disposal of plastic waste in an environmentally sound manner; (s) ―Waste to Energy‖ means using plastic waste for generation of energy and includes co -processing (e.g. in cement kilns). 4. Obligated Entities: The follo wing entities shall be covered under the Extended Producer Responsibility obligations and provisions of these guidelines namely: - (i) Producer (P) of plastic packaging; (ii) Importer (I) of all imported plastic packaging and / or plastic packaging of imported products; (iii) Brand Owners (BO) including online platforms/marketplaces and supermarkets/retail chains other than those, which are micro and small enterprises as per the criteria of Ministry of Micro, Small and Medium Enterprises, Government of India.; (iv) Plastic Waste Processors 5. Coverage of Extended Producer Responsibility: (5.1) The following plastic packaging categories are covers under Extended Producer Responsibility: (i) Category I Rigid plastic packaging; (ii) Category II Flexible plastic packaging of single layer or multilayer (more than one layer with different types of plastic), plastic sheets or like and covers made of plastic sheet, carry bags, plastic sachet or pouches; (iii) Category III Multilayered p lastic packaging (at least one layer of plastic and at least one layer o f material other than plastic); (iv) Category IV Plastic sheet or like used for packaging as well as carry bags made of compostable plastics. (5.2) The Extended Producer Responsibility Guidelines covers the following with respect to plastic packaging namely: - (i) Reuse; (ii) Recycling; (iii) Use of recycled plastic content; (iv) End of life disposal. 6. Registration: (6.1) (a)The following entities shall register on the centralized portal developed by Ce ntral Pollution Control Board namely: - (i) Producer (P); (ii) Importer (I); (iii) Brand owner (BO); (iv) Plastic Waste Processor engaged in (a) recycling, (b) waste to energy, (c) waste to oil, and (iv) industrial composting, (b) Registration of Producers, Importers & Bra nd-Owners (operating in one or two states) and Plastic Waste processors shall be done by State Pollution Control Board or Pollution Control Committee through the centralized Extended Producer Responsibility portal developed by Central Pollution Control Board. (c) After these guidelines have come into effect, with respect to, entities starting their business in a particular year and placing their products in market in that year, they shall have Extended Producer Responsibility target obligations from the next year. (6.2) The entities covered under clause 6.1 shall not carry any business without registration obtained through on - line centralized portal developed by Central Pollution Control Board. (6.3) The entities covered under clause (6.1) shall not deal with any entity not registered through on -line centralized portal developed by Central Pollution Control Board. (6.4) In case, it is found or determined that any entity registered on the on -line portal has provided false information or has wi llfully concealed information or there is any irregularity or deviation from the conditions stipulated while obtaining registration under Extended Producer Responsibility guidelines, then the registration of such an entity would be revoked for a one -year period after giving an opportunity to be heard. The entities whose registration has been revoked shall not be able to register afresh for the period of revocation. (6.5) In case any entity falls in more than one sub -category mentioned in the clause (6 .1) then the entity shall register under each of those sub -categories separately. Further, in cases, where the entity has units in different states, in a particular sub -category mentioned in clause 6.1, then these units shall also be registered separately. However, only one registration under a sub category in a state would be needed, even if, more than one unit are located in a state. The registration shall be as per Standard Operating Procedure laid down by Central Pollution Control Board for the purpose, as per these Guidelines. (6.6) While registering, the entities shall have to provide PAN Number, GST Number, CIN Number of the company and Aadhar Number and PAN Number of authorized person or representative and any other nec essary information as required. 7. Targets for Extended Producer Responsibility and obligations of Producers, Importers & Brand -Owners: (7.1) The Extended Producer Responsibility targets for the Producers, Importers & Brand -Owners sha ll be determined category-wise. (7.2) Producer (P): (a) Extended Producer Responsibility target (Refer example 1 to 3 in Annexure): 24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] Eligible Quantity in MT (Q 1) shall be the average weight of plastic packaging material (category -wise) sold in t he last two financial years (A) plus average quantity of pre -consumer plastic packaging waste in the last two financial years (B) minus the annual quantity (C) supplied to the entities covered under sub -clause 4 (iii) in the prev ious financial year as under: - Q 1 (in MT) = (A + B) - and the Extended Producer Responsibility target shall be determined category-wise , as given below Extended Producer Responsibility target Year Extended Producer Responsibility target (as a percentage of Q1 - category-wise) The Extended Producer Responsibility target in MT category -wise, as applicable, shall be provided by Producer, as part of Action Plan on the centralized portal developed by Central Pollution Control Board. (b) Obligation for recycling (Refer example 1 to 3 in Annexure): The Producer shall ensure minimum level of recycling (excluding end of life disposal) of plastic packaging waste collected under Extended Producer Responsibility Target, category-wise, as given below namely: - Minimum level of recycling (excluding end of life disposal) of plastic packaging waste (% of Extended Producer Responsibility Target) Plastic packaging category 2024-25 2025-26 2026-27 2027-28 and onwards Category I 50 60 70 80 Category II 30 40 50 60 Category III 30 40 50 60 Category IV 50 60 70 80 In case of Category IV plastic packaging category (plastic sheet or like used for packaging and carry bags made of compostable plastics), the minimum level of recyclin g means processing plastic packaging waste for composting through industrial composting facilities. (c) End of life disposal (refer examples 1 to 3 in Annexure): (i) Only those plastics, which cannot be recycled will be sent for end of life disposal such as road construction, waste to energy, waste to oil, cement kilns (for co processing) etc. as per relevant guidelines issued by Indian Road Congress or Central Pollution Control Board from time to time. (ii) The producers shall ensure end of life dis posal of the plastic packaging waste only through methodologies specified in Rule 5 (1) (b) of Plastic Waste Management Rules, 2016, (d) Obligation for use of recycled plastic content (Refer example 6 in Annexure) The Producer shall ensure use of recycled plastic in plastic packaging category-wise as given below namely: - Mandatory use of recycled plastic in plastic packaging (% of plastic manufactured for the year) Plastic packaging category Category I 30 40 50 60 Category II 10 10 20 20 Category III 5 5 10 10 In cases, where it is not possible to meet the obligation in respect of recycled plastic content on account of statutory requirements, the exemption will be granted by Central Pollution Contr ol Board on case -to-case basis. However, in such cases, the Producers, Importers & Brand -Owners will have to fulfil its obligation of use of recycled content (in quantitative terms) through purchase of certificate of equivalent quantity from such Produce rs, Importers & Brand - Owners who have used recycled content in excess of their obligation. Central Pollution Control Board will develop mechanism for such exchange on the centralized online portal. 7.3 Importer (I): (a) Extended Producer Responsibility Target (Refer example 1 to 3 in Annexure) Eligible Quantity in MT (Q 2) shall be the average weight of all plastic packaging material and / or plastic packaging of imported products (category -wise) imported and sold in the last two financial years (A) pl us average quantity of pre-consumer plastic packaging in the last two financial years (B) waste minus the annual quantity (C) supplied to the entities covered under sub-clause 4 (iii) in the previous financial years as under: - Q 2 (in MT) = (A + B) - C and the Extended Producer Responsibility target shall be determined, category-wise , as given below namely: - Year Extended Producer Responsibility target (as a percentage of Q 2 - category-wise) The Extended Producer Responsibility target in MT category -wise, as applicable, shall be provided by Importer as part of Action Plan on the centralized portal developed by Central Pollution Control Board. (b) Obligation for recycling (Refer example 1 to 3 in Annexure) The Importer shall ensure minimum level of recycling (excluding end of life disposal) of plastic packaging waste collected under extended producer responsibility Target, category-wise, as given below. Minimum level of recycling (excluding end of life disposal) of plastic packaging waste (% of extended producer responsibility Target) Plastic packaging category 2024-25 2025-26 2026-27 2027-28 and onwards Category I 50 60 70 80 Category II 30 40 50 60 Category III 30 40 50 60 Category IV 50 60 70 80 In case of Category IV plastic packaging category (plastic sheet or like used for packaging and carry bags made of compostable plastics), the minimum level of recycling means processing plastic packaging waste for composting through industrial composting facilities. (c) End of life disposal (refer examples 1 to 3 in Annexure) (i) Only those plastics, which cannot be recycled will be sent for end of life disposal such as road construction, waste to energy, waste to oil as per relevan t guidelines issued by Indian Road Congress or Central Pollution C ontrol Board from time to time. 26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (ii) The importer shall ensure end of life disposal of the plastic packaging waste only through methodologies specified in rule 5 (1) (b) of Plastic Waste Management Rules, 2016, as amended. (d) Obligation for use of recycled plastic content (Refer example 6 in Annexure) The Importer shall ensure use of recycled plastic in plastic packaging category-wise as given below. Mandatory use of recycled plastic in plastic packaging (% of imported plastic for the year) Plastic packaging category Category I 30 40 50 60 Category II 10 10 20 20 Category III 5 5 10 10 Any recycled plastic used in imported material shal l not be counted towards fulfilment of obligation. The importer will have to fulfil its obligation of use of recycled content (in quantitative terms) through purchase of certificate of equivalent quantity from such Producers, Importers & Brand -Owners who h ave used recycled content in excess of their obligation. Central Pollution Control Board will develop mechanism for such exchange on the centralized online portal. 7.4 Brand Owner (BO): a) Extended Producer Responsibility target (refer examples 1 to 3 in Annexure) Eligible Quantity in MT (Q 3) shall be the average weight of virgin plastic packaging material (category -wise) purchased and introduced in market in the last two financial years (A) plus average quantity of (B) of pre -consumer plastic packaging in the last two financial years as under: - Q 3 (in MT) = A + B The Extended Producer Responsibility target shall be determined, category-wise , as given below namely: - Year Extended Producer Responsibility Target (as a percentage of Q3 - category-wise) The Extended Producer Responsibility target in MT category -wise, as applicable, shall be provided by Brand Owner as part of the Action Plan on the centralized portal developed by Central Pollution Control Board. (b) Obligation for reuse (refer examples 4 and 5 in Annexure): I. The Brand Owner using Category I (rigid) plastic packaging for their products shall have minimum obligation to reuse such packaging as given below: - Provided that the reuse of Category I rigid plastic packaging in food contact applications shall be subject to regulation of Food Safety and Standards Authority of India. (II) Minimum obligation to reuse for Category I (rigid plastic packaging). Year Target ( as percentage of Category I rigid plastic packaging in products sold annually) A Category I rigid plastic packaging with volume or weight equal or more than 0.9 liter or kg but less than 4.9 litres or kg, as the case may be IV 2028-29 and onwards 25 B Category I rigid plastic packaging with volume of weight equal or more than 4.9 litres or kg. IV 2028-29 and onwards 85 (III) The quantity of rigid pac kaging reused by brand Owner shall be calculated by reducing virgin plastic packaging manufactured/imported/purchased in that year from the sales of the Brand Owner. The brand owner shall provide this information on the centralized portal developed by Central Pollution Control Board. (IV) The quantity of Category I rigid plastic packaging reused shall be reduced from the total plastic packaging used under Category I by the obligated entities (Brand Owners). III. The quantity of Category I rigid plastic packaging reused during the year 2022 – 2023 and 2023-2024, shall be reduced from the total plastic packaging used under Category I. (c) Obligation for recycling (refer examples 1 to 3 in Annexure): The Brand Owner shall ensure minimum level of recycling (excluding end of life disposal) of plastic packaging waste collected under Extended Producer Responsibility target, category-wise, as given below. Minimum level of recycling (excluding end of life disposal) of plastic packaging waste (% of Extended Producer Responsibility Target) Plastic packaging category 2024-25 2025-26 2026-27 2027-28 and onwards Category I 50 60 70 80 Category II 30 40 50 60 Category III 30 40 50 60 Category IV 50 60 70 80 In case of Category IV plastic packaging c ategory (plastic sheet or like used for packaging and carry bags made of compostable plastics), the minimum level of recycling means processing plastic packaging waste for composting through industrial composting facilities. (d) End of life disposal (refer examples 1 to 3 in Annexure) (i) Only those plastics, which cannot be recycled will be sent for end of life disposal such as road construction, waste to energy, waste to oil, as per relevant guidelines issued by Indian Road Congress or Central Poll ution Control Board from time to time. (ii) The Brand Owner shall ensure end of life disposal of the plastic packaging waste only through methodologies specified in rule 5 (1) (b) of the Plastic Waste Management Rules, 2016, as amended. (e) Obligation for use of recycled plastic content (refer examples 6 in Annexure) (i) The Brand Owner shall ensure use of recycled plastic in plastic packaging, categor y-wise, as given below namely: Mandatory use of recycled plastic in plastic packaging 28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (% of manufactured plastic for the year) Plastic packaging category Category I 30 40 50 60 Category II 10 10 20 20 Category III 5 5 10 10 (ii) In cases, where it is not possible to meet the obligation in respect of rec ycled plastic content on account of statutory requirements, the exemption will be granted by Central Pollution Control Board on case -to-case basis. However, in such cases, the Producers, Importers & Brand -Owners will have to fulfil its obligation of use of recycled content (in quantitative terms) through purchase of certificate of equivalent quantity from such Producers, Importers & Brand -Owners who have used recycled content in excess of their obligation. Central Pollution Control Board will develop mechanism for such exchange on the centralized online portal. (iii) In case, where Brand Owner is also Producer and/or Importer of plastic packaging material, the clause 7.2 and 7.3 shall also apply for determining their Extended Producer Responsibility target s and obligations as Producer and /or Importer, respectively. (7.5) The Extended Producer Responsibility target in MT category -wise, as applicable, shall be provided by all Producers, Importers & Brand-Owners as part of Action Plan on the centralized portal developed by Central Pollution Control Board. (7.6) The obligations for reuse, recycling of waste and use of recycled plastic content in packaging shall be reviewed every five years based upon available technologies for meeting the Targets specified. (7.7) Extended Producer Responsibility on plastic packaging will promote sustainable packaging, as per guidelines prepared by Central Pollution Control Board, inter alia based on the following criteria, (i) package designing promoting reuse; (ii) package designing amenable for recycling; (iii) recycled plastic content in plastic packaging material and; (iv) package designing for environment. (7.8) In case, the obligated entity utilizes plastic packaging which is 100% biodegradable in the ambient environment leaving no traces of micro plastics or chemical residue or any other traces having adverse environmental and health impacts as certified by regulatory entities Central Pollution Control Board, Bureau of Indian Standards, Central Institute of Petrochemicals Engineering & Technology, the Extended Producer Responsibility target will not be applicable for such material. 8. Generation of surplus Extended Producer Responsibility certificates, carry forward and offsetting against previous y ear Extended Producer Responsibility targets and obligations, and sale and purchase of surplus Extended Producer Responsibility certificates: (8.1) A Brand Owner who has fulfilled their Extended Producer Responsibility targets, category -wise, can use the surplus for the following namely: - (i) Off setting previous year shortfall subject to clause 9.5; (ii) Carry forward for use in succeeding year; (iii) Sell it to other Producers, Importers & Brand-Owners. (8.2) Surplus in one category can only be used for off -setting, carry forward and sale in the same category. A surplus under reuse can be used for against reuse, recycling and also end of life disposal. A surplus under recycling can be used for recycling and end of life dispo sal. A surplus under end of life disposal cannot be used for re use or recycle. (8.3) Producers, Importers & Brand -Owners can also meet their Extended Producer Responsibility obligations under a category by purchasing surplus Extended Producer Responsibility certificates from other Producers, Importers & Brand-Owners of the same category. (8.4) Such transactions shall be recorded and submitted by the Producers, Importers & Brand -Owners on the online portal while filing annual returns under the Extended Producer Responsibility framework. Central Pollution Control Board will develop mechanism for such exchange on the centralized portal. 9. Imposition of Environmental Compensation: (9.1) Environmental Compensation shall be levied based upon p olluter pays principle, with respect to non - fulfilment of Extended Producer Responsibility targets by Producers, Importers & Brand Owners, for the prupose of protecting and improving the quality of the environment and preventing, controlling and abating environment pollution . (9.2) Central Pollution Control Board shall lay down guidelines for imposition and collection of environment compensation on Producers, Importers & Brand -Owners, recyclers and end of life processors, in case of non - fulfilment of obligations set out in these guidelines, and the same shall be notified. The Guidelines for Environmental Compensation shall be updated, as required. (9.3) The Environment Compensation, as applicable, shall be levied by Central Pollution Control Board on the Producers, Importers & Brand -Owners operating in more than two states with respect to non -fulfillment of their Extended Producer Responsibility targets, responsibilities and obligations in these guidelines. (9.4) The Environment Compensation, as applic able, shall be levied by respective State Pollution Control Board on the Producers, Importers & Brand -Owners operating in their jurisdiction (for Producers, Importers & Brand -Owners not operating in more than two states/Union Territory‘s), Plastic Waste Processors which includes recyclers and other waste processors – waste to energy, waste to oil, co -processors, with respect to non -fulfillment of their Extended Producer Responsibility targets or responsibilities and obligations set out under these guide lines. In case, the State Pollution Control Board or Pollution Control Committee does not take action in reasonable time, the Central Pollution Control Board shall issue directions to the State Pollution Control Board /Pollution Control Committee. (9.5) P ayment of environmental compensation shall not absolve the Producers, Importers & Brand -Owners of the obligations set out in these guidelines. The unfulfilled Extended Producer Responsibility obligations for a particular year will be carried forward to the next year for a period of three years. In case, the shortfall of Extended Producer Responsibility obligation is addressed within three years. The environmental compensation levied shall be returned to the Producers, Importers & Brand-Owners as given below, namely (i) Within one year of levying of EC: 75% return; (ii) Within two years 60% return; (iii) Within three years 40% return, After completion of three years on environmental compensation getting due the entire environmental compensation amount shall be forfeited. T his arrangement shall allow for collection and recycling of plastic packaging waste by Producers, Importers & Brand-Owners in later years as well. (9.6) The funds collected under environmental compensation shall be kept in a separate Escrow account by Cent ral Pollution Control Board or State Pollution Control Board or Pollution Control Committee. The funds collected shall be utilized in collection, recycling and end of life disposal of uncollected and non -recycled or non- end of life disposal of plastic packaging waste, on which the environmental compensation is levied. Modalities for utilization of the funds for plastic waste management on an annual basis would be recommended by the Committee for Extended Producer Responsibility implementation and approved by the Competent Authority in the Ministry. 10. Role of Producers, Importers & Brand-Owners: (10.1) The Producers, Importers & Brand -Owners shall have to register through the online centralized portal developed by Central Pollution Control Board. The certificate of registration shall be issued using the portal. (10.2) Producers, Importers & Brand -Owners shall provide Action Plan containing information on the Extended Producer Responsibility Target, category -wise, where applicable, through the online central ized portal developed by Central Pollution Control Board, along with application for registration or renewal of registration under Plastic Waste Management Rules, 2016. The Action Plan shall cover tenure of the Registration as per the provisions of Plastic Waste Management Rules, 2016. The standard operating procedure for registration and the action plan pro forma shall be developed by Central Pollution Control Board as per these guidelines. (10.3) Brand Owner covered under clause 4 (iii) shall provide deta ils of plastic packaging purchased from Producers and/or Importers covered under clause 4 (i) and 4 (ii) separately. The quantities attributed to each Producer and Importer covered under clause 4 (i) and 4 (ii) obligated upon Brand Owner shall be deducted from the obligation of Producers and Importers. The record of such purchase including category -wise quantity purchased, shall be maintained separately by Brand Owner. (10.4) The Producers and Importers covered under clauses 4 (i) and 4 (ii) will maintain t he record of the quantity of plastic packaging material made available to Brand Owner covered under clause 4 (iii). The record of such sale including category-wise quantity sold, will be maintained separately by Producers and Importers. In case such record s are not maintained, they will have to fulfil the complete Extended Producer Responsibility obligation. The online platform shall cross-check the declaration of transactions among Producers, Importers & Brand-Owners. 30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (10.5) In order to develop a separate waste stream for collection of plastic packaging waste for directly fulfilling Extended Producer Responsibility obligations, the Producers, Importers & Brand -Owners may operate schemes such as deposit refund system or buy back or any other model. This will prevent mixing of plastic packaging waste with solid waste. (10.6) The Producers, Importers & Brand -Owners shall file annual returns on the plastic packaging waste collected and processed towards fulfilling obligations under Extended Producer Responsibili ty with the Central Pollution Control Board or concerned State Pollution Control Board or Pollution Control Committee as per pro forma prescribed by Central Pollution Control Board by the 30 th June of the next financial year. Information on the reuse and/or recycled content used for packaging purposes will also be provided. The details of the registered recyclers from whom the recycled plastic has been procured will also be provided. 11. Role of Plastic Waste Processors (Recyclers or Other Waste Proces sors including industrial composting facilities) (11.1) All plastic waste processors shall have to register with concerned State Pollution Control Board or Pollution Control Committee in accordance with provision 13(3) of Plastic Waste Management Rules, 20 16 on the centralized portal developed by Central Pollution Control Board. Central Pollution Control Board shall lay down uniform procedure for registration within three months of the publication of these guidelines. (11.2) The Plastic waste processors sh all submit annual returns after end of every financial year by 30th April of the next financial year on the quantity of plastic waste processed category -wise as per prescribed pro forma on the centralized portal developed by Central Pollution Control Board. (11.3) The total quantity of plastic waste processed by plastic waste processors and attributed to Producers, Importers & Brand-Owners, on an annual basis, will be made available on the centralized portal developed by Central Pollution Control Board as also on the website of Plastic waste processors. (11.4) In case, at any stage it is found that the information provided by the plastic waste processor is false, the plastic waste processor shall be debarred by State Pollution Control Board, as per proced ure laid down by Central Pollution Control Board , from operating under the Extended Producer Responsibility framework for a period of one year. (11.5) Only plastic waste processors registered under Plastic Waste Management Rules, 2016, as amended , shall provide certificates for plastic waste processing, except in case of use of plastic waste in road construction. In case where plastic waste is used in road construction the Producers, Importers & Brand -Owners shall provide a self - declaration certificate in pro forma developed by Central Pollution Control Board. The certificate provided by only registered plastic waste processors shall be considered for fulfilment of Extended Producer Responsibility obligations by Producers, Importers & Brand-Owners. (11.6) The pro forma for the certificate shall be developed by Central Pollution Control Board. In no case, the amount of plastic packaging waste recycled by the enterprise shall be more than installed capacity of the enterprise. The certificates will be for plastic packaging category-wise and shall include GST data of the enterprise. (11.7) The certificate for plastic packaging waste provided by registered plastic waste processors shall be in the name of registered Producers, Importers & Brand -Owners or Local authorities, as applicable, based upon agreed modalities. Central Pollution Control Board will develop mechanism for issuance of such certifi cate on the centralized portal. (11.8) The Plastic Waste Processors undertaking end -of-life disposal of plastic packag ing waste viz. waste to energy, waste to oil, cement kilns (co processing) shall provide information on an annual basis as per prescribed pro forma, on the centralized portal developed by Central Pollution Control Board. These entities shall ensure the disposal of plastic packaging waste as per relevant rules, guidelines framed by regulatory bodies in a n environmentally sound manner. 12. Role of Central Pollution Control Board (12.1) The Central Pollution Control Board shall register Producers, Importers & Brand-Owners who are operating in more than two states and plastic waste processors, through online portal. Central Pollution Control Board shall prescribe the standard operating procedure for registration of Producers, Importers & Brand -Owners under Pla stic Waste Management Rules, 2016. (12.2) The Central Pollution Control Board may charge fee for processing of applications for registration and an annual fee for processing of returns, as per procedure prescribed by CPCB. In case, where Producers, Importe rs & Brand-Owners, are operating in the jurisdiction of a State Pollution Control Board or Pollution Control Committee, the Central Pollution Control Board as per guidelines so decided, will share the application fee with the concerned State Pollution Control Board or Pollution Control Committee. (12.3) The registration shall be done within two weeks from the submission of a complete application online by the Producers, Importers & Brand -Owners. The tenure of registration shall be as per Plastic Wast e Management Rules, (12.4) Central Pollution Control Board by itself or through a designated agency shall verify compliance of Producers, Importers & Brand -Owners through inspection and periodic audit, as deemed appropriate. Central Pollution Control Board, as required, can also verify compliance of Plastic Waste Processors through inspection and periodic audit. In case of plastic waste processors and Producers, Importers & Brand -Owners operating in a State or Union Territory, Central Pollution Contro l Board may, if required, direct State Pollution Control Board or Pollution Co ntrol Committee to take action. (12.5) Central Pollution Control Board shall publish the list of Producers, Importers & Brand -Owners who have failed to meet Extended Producer Res ponsibility targets and obligations in the previous financial year, on an annual basis, by 30th September of the next financial year. (12.6) The Central Pollution Control Board will establish a mechanism to ensure a regular dialogue between relevant stakeholders involved in the fulfilment of extended producer responsibility obligations for plastics under the Plast ic Waste Management Rule, 2016. (12.7) The Central Pollution Control Board shall carry out a compositional survey of collected mixed municipal was te to determine the share of plastic waste as well as different categories of plastics packaging m aterial on a half -yearly basis. (12.8) The Central Pollution Control Board shall carry out review of technologies related to plastic packaging and plastic waste management for techno-economic viability and feasibility specifically with respect to clause 7.6. 13. Role of State Pollution Control Board or Pollution Control Committee: (13.1) The concerned State Pollution Control Board or Pollution Control Committ ee shall register Producers, Importers & Brand -Owners (operating in one or two states) and plastic waste processors, through the online portal developed by Central Pollution Control Board. Provision for registration shall be made on the Extended Producer Responsibility portal. State Pollution Control Board or Pollution Control Committee by itself or through a designated agency shall verify compliance of Producers, Importers & Brand -Owners through inspection and periodic audit, as deemed appropriate, of Pro ducers, Importers & Brand -Owners as well as plastic waste processors in their jurisdiction as per the Plastic Waste Management Rule, 2016. (13.2) The State Pollution Control Board or Pollution Control Committee shall bring out a list of entities (Except ion Report) who have not fulfilled their Extended Producer Responsibility responsibilities on annual basis and publish the same on their website. The State Pollution Control Board or Pollution Control Committee shall submit the Annual Reports submitted by Producers, Importers & Brand -Owners and plastic waste processors in their jurisdiction to Central Pollution Control Board and upload the same on the online Extended Producer Responsibility portal. (13.3) State Pollution Control Board or Pollution Contro l Committee will establish a mechanism to ensure a regular dialogue between relevant stakeholders involved in the fulfilment of extended producer responsibility obligations under the Plastic Waste Management Rule, 2016. (13.4) State Pollution Control Boa rd or Pollution Control Committee shall carry out a compositional survey of collected mixed municipal waste to determine the share of plastic waste as well as different categories of plastics packaging material on a half-yearly basis. 14. Plastic Packaging Waste Collection System by Producers, Importers & Brand-Owners (14.1) Producers, Importers & Brand -Owners while fulfilling their Extended Producer Responsibility obligations may develop collection and segregation infrastructure of plastic packaging waste , as required, based on the category of plastics. It may include the following based on implementation modality of Extended Producer Responsibility adopted by Produce rs, Importers & Brand -Owners: -(a) establish waste plastic collection points and Material Recovery Facilities (MRFs); (b) ensure the collection of the plastic packaging waste from the collection points, with a frequency that is proportionate to the area covered and the volume; (c) offer the collection of plastic, from the entities like urban lo cal bodies, gram panchayats, other public authorities or third parties carrying out waste management, and provide for the collection from all entities that have made use of that offer; provide for the necessary practical arrangements for collection and tra nsport; (d) ensure that the plastic packaging waste collected from the collection points are subsequently subject to recycling in a registered facility by a recycler or its permitted end use in the designated manner. (14.2) Producers, Importers & Brand -Owners may ensure the network of collection points taking into account population size, expected volume of plastic or packaging waste, accessibility and vicinity to end -users, not being limited to areas where the collection and subsequent management is profitable. (14.3) The entities involved in waste collection will hand over the waste for treatment and recycling or for identified end uses. 32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (14.4) Participation of voluntary collection points - voluntary collection points will hand over plastic packaging wast e to the Producers, Importers & Brand -Owners or third party agencies acting on their behalf with a view to their treatment and recycling or their identified end use. 15. Fulfilment of Extended Producer Responsibility Obligations The Producers, Importers & Brand-Owners shall have to provide the details of recycling certificate only from registered recyclers along with the details of quantity sent for end of life disposal, by 30th June of next financial year while filing annual returns on the online portal. T he details provided by Producers, Importers & Brand -Owners and registered plastic waste processors will be cross -checked by the online portal. In case of difference, the lower figure would be considered towards fulfilment of Extended Producer Responsibilit y obligation of Producers, Importers & Brand-Owners. The certificates shall be subject to verification by Central Pollution Control Board or State Pollution Control Board or Pollution Control Committee, as the case may be. 16. Centralized Online Portal (16.1) Central Pollution Control Board shall establish an online system for the registration as well as for filing of annual returns by Producers, Importers & Brand -Owners, plastic waste processors of plastic packaging waste by 31 st March 2022:- (16.2) The on line system developed by Central Pollution Control Board for the registration as well as for filing of returns by Producers, Importers & Brand-Owners shall reflect the plastic packaging material introduced in the market Producers, Importers & Brand -Owners in a financial year. It shall also reflect the details regarding the audit of the Producers, Importers & Brand-Owners as well as recyclers or other waste processors of plastic packaging waste. (16.3) The State Pollution Control Board or Pollution Control Committee shall also use the centralized portal developed by Central Pollution Control Board for registration of Producers, Importers & Brand -Owners as well as recyclers/waste processors. The centralized portal would act as the single point data repository with respect to orders and guidelines related to implementation of Extended Producer Responsibility for plastic packaging under Plastic Waste Management Rule, 2016 Producers, Importers & Brand -Owners may, if they so desire, facilitate the development of online web portal or platform. (16.3) Till the online web portal is developed all activities related to implementation of Extended Producer Responsibility under the Plastic Waste Management Rules, 2016 will be done in an offline manner. 17. Monitoring State Pollution Control Board or Pollution Control Committee shall submit annual report on Extended Producer Responsibility portal with respect to fulfilment of Extended Producer Responsibility by Producers, Importers & Brand-Owners (which include manufacturers of plastic packaging material) and plastic waste processors in the State/Union Territory to Central Pollution Control Board. The report shall also be submitted to the State Level Monitoring Committee constituted under the Plastic Waste Management Rules, 2 016. State Pollution Control Board or Pollution Control Committee shall also submit annual report with respect to recyclers or end of life disposal in the State or Union Territory to Central Pollution Control Board by 31 st July of the next year. 18. Committee for Extended Producer Responsibility under PWM Rules (18.1) A committee shall be constituted by the Central Pollution Control Board under chairpersonship of Chairman, Central Pollution Control Board to recommend measures to Ministry of Environment, For est and Climate Change for effective implementation of Extended Producer Responsibility including amendments to Extended Producer Responsibility guidelines. The committee shall monitor the implementations of Extended Producer Responsibility and also take such measures as required for removal of difficulties. The Committee shall also be tasked with the guiding and supervision of the online portal including approval of requisite forms or pro forma. (18.2) The committee shall comprise of representative from c oncerned line Ministries/Departments such as Ministry of Housing and Urban Affairs, Ministry of Micro, Small and Medium Enterprises, Department of Drinking Water and Sanitation, Department of Chemical and Petrochemicals; Bureau of Indian Standards, three State Pollution Control Board or Pollution Control Committee, Central Institute of Plastic Engineering and Technology (CIPET), National Environmental Engineering Research Institute (NEERI), and three industry associations, and any other invitee as decided by the chairperson of the committee. ANNEXURE Examples for Clause 7 Extended Producer Responsibility Target and Minimum level of recycling of plastic packaging waste [Refer Clause 7.2 (a), (b) & (c), Clause 7.3 (a), (b) & (c), and Clause 7.4 (a), (b) & (c)] Example 1: Year 2022-23 Plastic packaging introduced in the market category -wise (Category II Flexible plastic packaging) Extended Producer Responsibility Target @ 70 % 70 MT Minimum level of recycling of plastic packaging waste collected u nder Extended Producer Responsibility - no threshold has been prescribed Quantity of plastic packaging waste collected under Extended Producer Responsibility and recycled as per actuals Quantity of plastic packaging waste collected under Extended Produ cer Responsibility and used for energy recovery, co -processing, road construction, waste to oil etc. as per actuals Example 2: Year 2024-25 Plastic packaging introduced in the market category -wise (Category II Flexible plastic packaging) Extended Producer Responsibility Target @ 100 % 100 MT Minimum level of recycling of plastic packaging waste collected under Extended Producer Responsibility @ 30% Minimum 30 MT of plastic packaging waste collected under Extended Producer Responsibility needs to be recycled. Remaining plastic packaging waste collected(Maximum 70 MT) may be used for energy recovery, co -processing, road construction, waste to oil etc. Example 3: Year 2028-29 Plastic packaging introduced in the market category -wise (Category II Flexible plastic packaging) Extended Producer Responsibility Target @ 100 % 100 MT Minimum level of recycling of plastic packaging waste collected under Extended Producer Responsibility @ 60 % Minimum 60 MT of plastic packaging waste collected under Extended Producer Responsibility needs to be recycled. Remaining plastic packaging waste collected(Maximum 40 MT) may be used for energy recovery, co -processing, road construction, waste to oil etc. Reuse [Refer Clause 7.4 (b)] Example 4: Year 2025 – 26 (Minimum obligation for reuse comes into effect) Plastic packaging introduced in the market category -wise (Category I Rigid Plastic Packaging) Reuse of Category I rigid plastic packaging with volume or weight equal or more than 0.9 litres or 34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] kilogrammes bUnion Territory less than 4.9 litres or kilogrammes (Reuse @ 15 %; minimum obligation for reuse 10 %) Fresh plastic packaging introduced (A) 85 MT Extended Producer Responsibility target for compliance Minimum level of recycling of Category I plastic packaging waste collected under Extended Producer Responsibility @ 60% Minimum 51 MT of plastic packaging waste collected under Extended Producer Responsibility needs to be recycled. A maximum of 34 MT plastic p ackaging waste collected may be used for energy recovery, co -processing, road construction, waste to oil etc. Example 5: For Year 2022 - 23 Plastic packaging introduced in the market category -wise (Category I Rigid Plastic Packaging) Reuse of Category I rigid plastic packaging with volume or weight equal or more than 0.9 litres or kilogrammes bUnion Territory less than 4.9 litres or kilogrammes Fresh plastic packaging introduced (A) 90 MT Extended Producer Responsibility Target @ 35 % of (A) 31.5 MT Use of recycled plastic content [Refer Clause 7.2 (d), 7.3 (d)] Example 6: Year 2025-26 Plastic packaging introduced in the market category -wise (Category II Flexible plastic packaging) Extended Producer Responsibility Target as pe r clause 5.1 Minimum content of recycled plastic in packaging @ 10% 10 MT of plastic content in the packaging should be recycled plastic 90 MT of virgin plastic content in packaging [F. No. 17/2/2001 – Part I - HSMD] NARESH PAL GANGWAR, Addl. Secy. Note : The principal rules were published in the Gazette of India, Extraordinary, Part II Section 3, Sub -Section (i) vide number G.S.R 320 (E) dated the 18 th March, 2016 and subsequently amended vide notification numbers G.S.R 285 (E) dat ed the 27 th March, 2018, G.S.R. 571 (E) dated the 12 th August, 2021 and G.S.R. 647 (E) dated the 17th September, 2021. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.
Full text as ingested. Verify against the official source above.